2001 Chevrolet Suburban C1500FACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil w/o Rear AC 8.00 OZS. 0.23 L PAG 46 S
Air Cond Compressor Oil w/Rear A/C 11.00 OZS. 0.32 L PAG 46 S
Air Cond Refrigerant 3.00 LBS. 1.36 KG R-134a S
Automatic Transmission Fluid Trans Mfr CD 4L60E/M30 Drain and Refill 7.70 QTS. 7.28 L Automatic Transmission Fluid DEXRON VI Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. S
Automatic Transmission Fluid Trans Mfr CD 4L60E/M30 Overhaul 13.50 QTS. 12.77 L Automatic Transmission Fluid DEXRON VI Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. S
Brake Fluid N/A N/A DOT 3 Brake Fluid S
Differential Gear Oil Front N/A N/A SAE 80W-90 Gear Oil S
Differential Gear Oil Rear N/A N/A SAE 75W-90 Synthetic Gear Oil S
Engine Coolant 5.3L Eng w/Front A/C 14.40 QTS. 13.62 L 50/50 mixture of DEX-COOL and clean, drinkable water S
Engine Coolant 5.3L Eng w/Front & Rear A/C 15.80 QTS. 14.95 L 50/50 mixture of DEX-COOL and clean, drinkable water S
Engine Oil 5.3L Eng 6.00 QTS. 5.67 L API - SAE 5W-30 S
Fuel Tank C1500,K1500 32.50 GALS. 123.02 L S
Power Steering Fluid 1.10 QTS. 1.04 L GM Power Steering Fluid S
Transfer Case Fluid 2.00 QTS. 1.89 L AUTO TRAK II Fluid GM Part No. 12378508. S
Windshield Washer Fluid N/A N/A Optikleen Windshield Washer Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.