Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2000 Chevrolet Venture V6-3.4L VIN EFACTORY OEM SERVICE PROCEDURE
Cruise Control Module: Service and Repair
REMOVAL PROCEDURE
1. Remove the cruise control cable from the module.
2. Disconnect the electrical connector.
3. Remove the mounting bracket bolt from the cruise control module.
4. Remove the cruise control module from the mounting bracket.
INSTALLATION PROCEDURE
1. Install the cruise control module to the mounting bracket.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the mounting bracket bolt to the cruise control module.
Tighten
Tighten the bolt to 6 N.m (53 lb in).
3. Connect the electrical connector to the module.
4. Install the cruise control cable to the module.
5. Adjust the cruise control cable. Refer to Cruise Control Cable Replacement.
1. Remove the cruise control cable from the module.
2. Disconnect the electrical connector.
3. Remove the mounting bracket bolt from the cruise control module.
4. Remove the cruise control module from the mounting bracket.
INSTALLATION PROCEDURE
1. Install the cruise control module to the mounting bracket.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the mounting bracket bolt to the cruise control module.
Tighten
Tighten the bolt to 6 N.m (53 lb in).
3. Connect the electrical connector to the module.
4. Install the cruise control cable to the module.
5. Adjust the cruise control cable. Refer to Cruise Control Cable Replacement.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.