The Body Control Module (BCM) controls the door locking and the interior lighting portions of the keyless entry system. On vehicles equipped with the content theft deterrent system (RPO UA6), the BCM also controls the remote alarm. One of 3 BCM types is installed on this vehicle based on vehicle equipment:
^ BCM type 2 provides the following features:
- Interior illumination control
- Inadvertent load (battery rundown) protection
- Chime functions
- Automatic power door locks
^ BCM type 3 provides the following features:
- BCM type 2 features
- Keyless entry system (RPO AU0)
^ BCM type 4 provides the following features:
- BCM type 3 features
- Content theft deterrent system (RPO UA6) with remote activation verification and remote alarm

Refer to Body Control System Circuit Description in Body Control Systems.

Diagnostic Trouble Code (DTC)
The Remote Control Door Lock Receiver (RCDLR) sends the following messages to the body control module (BCM) through the RFA link.
^ Door locking commands
^ Remote alarm system, if equipped

The BCM sets DTC 8 if the RFA link circuit 377 is open or shorted to B+ or ground.

For a description of the RPO Code(s) shown in this article, refer to the RPO Code List found at Vehicle/Application and ID. Application and ID

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Body Control Module (BCM)

Use the Manual With the Right Hardware

When to See a Mechanic

Rather have a pro handle this?