Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2000 Chevrolet Venture Base, Van Cargo ExtendedFACTORY OEM SERVICE PROCEDURE
Symptom Tests: Notes
NOTE:
Check Body Control Module (BCM) for DTCs. See SELF-DIAGNOSTIC SYSTEM
. Repair any stored DTCs before performing system tests.
SYMPTOM INDEX
| Symptom | Test |
|---|---|
| Courtesy Lamps Inoperative With Transmitter | A |
| Door Lock/Unlock Inoperative - Driver Door | B |
| Door Lock/Unlock Inoperative - Passenger Door | C |
| Door Lock Inoperative With Transmitter - All Doors | D |
| Door Unlock Inoperative With Transmitter - All Doors | E |
| Power Sliding Door Open/Close Inoperative With Transmitter | F |
| Keyless Entry System Does Not Change Customization Modes | G |
| Keyless Entry System Inoperative | H |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
