Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1998 Chevrolet Tracker 4D Utility, 4WD, AutomaticFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 3.50 OZS. | 0.1 L | PAG 100 | S | |||
| Air Cond Refrigerant | 0.88 LBS. | 0.39 KG | R-134a | S | |||
| Automatic Transmission Fluid | 4 Door | Overhaul | 7.30 QTS. | 6.9 L | Automatic Transmission Fluid DEXRON VI | Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. | S |
| Automatic Transmission Fluid | Drain and Refill | 3.00 QTS. | 2.83 L | Automatic Transmission Fluid DEXRON VI | Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. | S | |
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | S | |||
| Differential Gear Oil | 4WD | Front | 1.10 QTS. | 1.04 L | API - GL-5, SAE 80W-90 Gear Oil | GM Part No. 12345977. | S |
| Differential Gear Oil | Rear | 2.30 QTS. | 2.17 L | API - GL-5, SAE 80W-90 Gear Oil | S | ||
| Engine Coolant | Automatic Trans | 5.50 QTS. | 5.2 L | 50/50 mixture of DEX-COOL and clean water (preferably distilled) | S | ||
| Engine Oil | w/Filter | 4.50 QTS. | 4.25 L | API - SAE 10W-30 | S | ||
| Fuel Tank | 4 Door | 14.50 GALS. | 54.88 L | S | |||
| Manual Transmission Fluid | 4WD | 1.60 QTS. | 1.51 L | GM Synthetic Manual Transmission Fluid or API - GL-4, SAE 75W-90 Gear Oil | S | ||
| Power Steering Fluid | N/A | N/A | Automatic Transmission Fluid DEXRON III | S | |||
| Transfer Case Fluid | 4WD | 1.80 QTS. | 1.7 L | SAE 75W-90 API - GL-4 Gear Oil | S | ||
| Windshield Washer Fluid | N/A | N/A | Optikleen Windshield Washer Fluid | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.