Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1998 Chevrolet Prizm LSi, Automatic, A245E/MS7FACTORY OEM SERVICE PROCEDURE
DTC Definitions
DTC IDENTIFICATION
| DTC | Description | Type |
|---|---|---|
| P0105 | MAP Sensor Circuit | A |
| P0106 | MAP Sensor System Performance | A |
| P0110 | IAT Sensor Circuit | A |
| P0115 | ECT Sensor Circuit | A |
| P0116 | ECT Sensor Circuit Performance | A |
| P0120 | TP Sensor Circuit | A |
| P0121 | TP Sensor System Performance | A |
| P0125 | ECT Excessive Time To Enter Closed Loop | B |
| P0130 | HO2S-1 Circuit | B |
| P0133 | HO2S-1 Slow Response | B |
| P0135 | HO2S-1 Heater Circuit | B |
| P0136 | HO2S-2 Circuit | B |
| P0141 | HO2S-2 Heater Circuit | B |
| P0171 | Fuel Trim System Lean | B |
| P0172 | Fuel Trim System Rich | B |
| P0300 | Engine Misfire Detected | B |
| P0301 | Cylinder No. 1 Misfire Detected | B |
| P0302 | Cylinder No. 2 Misfire Detected | B |
| P0303 | Cylinder No. 3 Misfire Detected | B |
| P0304 | Cylinder No. 4 Misfire Detected | B |
| P0325 | KS Circuit | B |
| P0335 | CKP Sensor Circuit | B |
| P0336 | CKP Sensor Performance | B |
| P0340 | CMP Sensor Circuit | B |
| P0420 | TWC System Efficiency Low | B |
| P0440 | EVAP System | B |
| P0441 | EVAP System Incorrect Purge Flow | B |
| P0446 | EVAP Vent Control System | B |
| P0450 | EVAP System Pressure Sensor Circuit | B |
| P0500 | VSS Circuit | A |
| P0505 | Idle Control System | B |
| P1300 | Ignition Control Module No. 1 Circuit | A |
| P1310 | Ignition Control Module No. 2 Circuit | A |
| P1335 | CKP Sensor Circuit | A |
| P1520 | Stoplight Switch Circuit | B |
| P1600 | PCM Battery | A |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.
