BATTERY SPECIFICATIONS

Application	Cold Crank Amps @ 0°F (-18°C)	Reserve Capacity Minutes
1.0L	390	71

FLUID CAPACITY (CRANKCASE) ⁽¹⁾

Application

⁽²⁾ Quantity Qts. (L)

1.0L

3.5 (3.3)

⁽¹⁾	Fluid capacities listed are approximate. Always fill to FULL mark.

⁽²⁾	Includes oil filter capacity.

FLUID CAPACITY (COOLING SYSTEM) ⁽¹⁾

Application

⁽²⁾ Quantity Qts. (L)

Automatic Transmission

4.2 (4.0)

Manual Transmission

4.1 (3.9)

⁽¹⁾	Fluid capacities listed are approximate. Always fill to FULL mark.

⁽²⁾	Includes heater.

FLUID CAPACITY (AUTOMATIC TRANSAXLE/TRANSMISSION) ⁽¹⁾⁽²⁾

Application

⁽³⁾ Quantity Qts. (L)

1.0L

5.2 (4.9)

⁽¹⁾	Fluid capacities listed are approximate. Always fill to FULL mark.

⁽²⁾	Drain and refill capacity only. Does not include torque converter.

⁽³⁾	Dexron-III or Dexron-IIE.

FLUID CAPACITY (MANUAL TRANSAXLE/TRANSMISSION) ⁽¹⁾

Application

Quantity Qts. (L)

1.0L

⁽²⁾ 2.5 (2.4)

⁽¹⁾	Fluid capacities listed are approximate. Always fill to FULL mark.

⁽²⁾	SAE 75W-90 GL-4 gear oil.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Engine Controls - Specifications - 1.0L: Capacities