Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1998 Chevrolet Forward Control P12FACTORY OEM SERVICE PROCEDURE
Specifications Index
FORWARD CONTROL SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | A/C SYSTEM SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Battery | |||
| 4.3L | CAPACITIES | ||
| 5.7L | CAPACITIES | ||
| 6.5L | CAPACITIES | ||
| 7.4L | CAPACITIES | ||
| Brakes | |||
| Bleeding Sequence | RR, LR, RF, LF | ||
| Disc Brakes | DISC BRAKE SPECIFICATIONS | ||
| Drum Brakes | DRUM BRAKE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Charging | |||
| Generator | See GENERATOR USAGE/AMP OUTPUT RATING table under DESCRIPTION | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Drive Belts | |||
| Adjustment | BELT ADJUSTMENT | ||
| Belt Routing | See appropriate illustration under SERPENTINE BELT ROUTING & ALIGNMENT -- TRUCKS | ||
| Engine Cooling | |||
| General Service Specifications | COOLING SYSTEM SPECIFICATIONS | ||
| Radiator Cap Pressure | 15 psi | ||
| Thermostat R & I | |||
| 4.3L, 5.7L, 7.4L | NA | ||
| 6.5L | THERMOSTAT | ||
| Water Pump R & I | |||
| 4.3L, 5.7L, 7.4L | WATER PUMP | ||
| 6.5L | WATER PUMP | ||
| Engine Mechanical | |||
| 4.3L, 5.7L, 7.4L | |||
| Compression | ENGINE COMPRESSION | ||
| Oil Pressure | OIL PRESSURE | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| 6.5L | |||
| Compression | ENGINE COMPRESSION | ||
| Oil pressure | Normal oil pressure is 6 psi (41 kPa) at idle and 30-43 psi (207-296 kPa) at 2000 RPM. | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Flex Plate/Drive PlateTorque | |||
| 4.3L, 5.7L | 74 Ft. Lbs. (100 N.m) | ||
| 6.5L | 65 Ft. Lbs. (90 N.m) | ||
| 7.4L | 66 Ft. Lbs. ( 90 N.m) | ||
| Fuel System | |||
| Pressure Specification | |||
| 4.3L, 5.7L | 60-66 psi (4.2-4.6 kg/cm2 ) | ||
| 7.4L | 56-62 psi (4.0-4.4 kg/cm2 ) | ||
| Fuel Pressure Test Procedure | |||
| 4.3L | FUEL SYSTEM PRESSURE TEST | ||
| 5.7L | FUEL SYSTEM PRESSURE TEST | ||
| 6.5L | FUEL SYSTEM PRESSURE TEST | ||
| 7.4L | FUEL SYSTEM PRESSURE TEST | ||
| Fuel Filter Location and R & I | |||
| 4.3L | IN-LINE FUEL FILTER REPLACEMENT | ||
| 5.7L | IN-LINE FUEL FILTER REPLACEMENT | ||
| 6.5L | FUEL MANAGER/FILTER ELEMENT | ||
| 7.4L | NA | ||
| Fuel Filter R & I | Link | ||
| Ignition | |||
| Firing Order & Cylinder Identification | |||
| 4.3L | See FIRING ORDER & CYLINDER IDENTIFICATION | ||
| 5.7L | See FIRING ORDER & CYLINDER IDENTIFICATION | ||
| 6.5L | See FIRING ORDER & CYLINDER IDENTIFICATION | ||
| 7.4L | See FIRING ORDER & CYLINDER IDENTIFICATION | ||
| Ignition Wires (Resistance) | 30,000 Ohms Maximum | ||
| Ignition Wires (Routing) | |||
| 4.3L | FIRING ORDER | ||
| 5.7L | FIRING ORDER | ||
| 6.5L | NA | ||
| 7.4L | FIRING ORDER | ||
| Spark Plug | |||
| 4.3L | |||
| Type | AC 41-932 | ||
| Gap | .045 In. (1.14 mm) | ||
| Torque | 14 Ft. Lbs. (20 N.m) Tighten spark plugs to 22 ft. lbs. (30 N.m) if using a NEW cylinder head. |
||
| 5.7L | |||
| Type | AC 41-932 | ||
| Gap | .060 In. (1.52 mm) | ||
| Torque | 14 Ft. Lbs. (20 N.m) Tighten spark plugs to 22 ft. lbs. (30 N.m) if using a NEW cylinder head. |
||
| 7.4L | |||
| Type | AC 41-932 | ||
| Gap | .060 In. (1.52 mm) | ||
| Torque | 14 Ft. Lbs. (20 N.m) Tighten spark plugs to 22 ft. lbs. (30 N.m) if using a NEW cylinder head. |
||
| Starting | |||
| Starter | ON-VEHICLE TESTING | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel Alignment | |||
| Adjustment Specifications | WHEEL ALIGNMENT SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | |||
| With 8-Lug Dual Rear Wheels | 140 Ft. Lbs. (190 N.m) | ||
| With 10-Lug Dual Rear Wheels | Step 1 - 140 Ft. Lbs. (190 N.m) Step 2 - 175 Ft. Lbs. (240 N.m) |
||
| With Single Rear Wheels | 120 Ft. Lbs. (160 N.m) | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
