1998 Chevrolet Cavalier Z24, 2D Convertible, StandardFACTORY OEM SERVICE PROCEDURE

Doors Do Not Unlock From Either Transmitter

  1. Disconnect remote control door lock receiver Black, 16-pin connector C1. Connect a fused jumper between remote control door lock receiver connector terminals "B" (White wire) and "E" (Orange/Black wire). If doors unlock, go to step 2). If doors do not unlock, go to step 3).
  2. Replace remote control door lock receiver. Verify system operation.
  3. Using a fused jumper wire connected to battery voltage, backprobe door lock relay Black, 6-pin connector, terminal "F" (White wire). If doors unlock, go to next step. If door do not unlock, go to step 5).
  4. Repair open in White wire between remote control door lock receiver and door lock receiver. Verify system operation.
  5. Replace door lock relay. Verify system operation.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.