Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1998 Chevrolet Camaro SS, 2D Convertible, StandardFACTORY OEM SERVICE PROCEDURE
Clearing DTCS
- Current codes will remain stored and displayed as long as BCM detects fault conditions. To clear history codes on vehicles with power door locks, depress door unlock switch for 4 seconds while BCM is in diagnostic mode. After 4-second time period, chime will sound 3 times to confirm codes have cleared.
- To clear history codes on vehicles without power door locks, using a fused jumper wire connected to ground, backprobe between BCM 5-pin connector C1, terminal "D" (Orange/Black wire) for 4 seconds while BCM is in diagnostic mode. After 4-second time period, chime will sound 3 times to confirm codes have cleared.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.