Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1997 Chevrolet Venture LSFACTORY OEM SERVICE PROCEDURE
Torque Specifications
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| ABS Modulator-To-Master Cylinder Through-Bolts | 17 (23) | |
| Axle Shaft Nut | 151 (205) | |
| Brake Caliper Bolts | 63 (85) | |
| Hub/Bearing Assembly Bolts | ||
| Front | 70 (95) | |
| Rear | 63 (85) | |
| Master Cylinder-To-Vacuum Booster Nut | 20 (27) | |
| Modulator Brake Pipe Fitting | 18 (24) | |
| Wheel Lug Nuts | 100 (136) | |
| INCH Lbs. (N.m) | ||
| Brake Caliper/Cylinder Bleeder Valves | ||
| Front | 115 (13) | |
| Rear | 62 (7) | |
| Modulator Bleeder Valves | 80 (9) | |
| Modulator Gear Cover Screws | 35 (4) | |
| Modulator Gear Retaining Nut | 75 (8.5) | |
| Motor Pack-To-Modulator Screws | 40 (4.5) | |
| Solenoid-To-ABS Modulator Screws | 40 (4.5) | |
| TCS Modulator Assembly Bolt To Bracket | 44 (5) | |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.