Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1997 Chevrolet Venture LSFACTORY OEM SERVICE PROCEDURE
Entering Diagnostics
- Remove BCM PRGRM (10-amp) fuse from instrument panel fuse block. Turn ignition switch to ACC position. Seat belt indicator and chime will activate 2-4 times to indicate which type of BCM is used in vehicle. Ensure installed BCM is compatible with features available on vehicle. Replace BCM if necessary.
- At this time, vehicle is now in feature customization mode. Turn ignition switch to LOCK, then to ACC position within one second. Diagnostic Trouble Codes (DTCs) may flash and chime simultaneously from 1-8 times. See BCM DTC DEFINITION . If more than one DTC exists, codes will be flashed in sequence with a 2-second pause between codes. DTCs will repeat 3 times.
- DTCs will be stored for 10 years unless they are erased. Record any existing DTCs, then press and hold any door unlock switch for 4 seconds to erase DTCs. Exit diagnostics. See EXITING DIAGNOSTICS .
- Operate function(s) that set DTC. Re-enter diagnostics, and check if any DTCs exist. If any DTCs exist, perform appropriate test under DIAGNOSIS & REPAIR .
- If diagnostics cannot be accessed, try entering diagnostics again. If diagnostics still cannot be entered, see CANNOT ENTER DIAGNOSTICS under DIAGNOSIS & REPAIR .
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.