Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1997 Chevrolet Corvette AutomaticFACTORY OEM SERVICE PROCEDURE
Automatic Transmissions DTCS
AUTOMATIC TRANSMISSIONS DTCS
| DTC | Description |
|---|---|
| P0218 | TRANSMISSION FLUID OVERTEMP |
| P0502 | VEHICLE SPEED SENSOR CIRCUIT (LOW INPUT) |
| P0503 | VEHICLE SPEED SENSOR CIRCUIT (INTERMITTENT) |
| P0560 | SYSTEM VOLTAGE MALFUNCTION |
| P0711 | TRANS. FLUID TEMPERATURE (TFT) SENSOR CIRCUIT (RANGE/PERFORMANCE) |
| P0712 | TRANS. FLUID TEMPERATURE (TFT) SENSOR CIRCUIT (LOW INPUT) |
| P0713 | TRANS. FLUID TEMPERATURE (TFT) SENSOR CIRCUIT (HIGH INPUT) |
| P0719 | BRAKE SWITCH CIRCUIT LOW INPUT (SWITCH STUCK ON) |
| P0724 | BRAKE SWITCH CIRCUIT HIGH INPUT (SWITCH STUCK OFF) |
| P0740 | TCC SOLENOID ELECTRICAL MALFUNCTION |
| P0742 | TCC CIRCUIT INOPERATIVE (STUCK ON) |
| P0748 | PRESSURE CONTROL SOLENOID (PCS) ELECTRICAL MALFUNCTION |
| P0751 | 1-2 SHIFT SOLENOID ("A") PERFORMANCE MALFUNCTION |
| P0753 | 1-2 SHIFT SOLENOID ("A") ELECTRICAL MALFUNCTION |
| P0756 | 2-3 SHIFT SOLENOID ("B") PERFORMANCE MALFUNCTION |
| P0758 | 2-3 SHIFT SOLENOID ("B") ELECTRICAL MALFUNCTION |
| P0785 | 3-2 SHIFT SOLENOID ELECTRICAL MALFUNCTION |
| P1572 | TRACTION CONTROL SYSTEM (TCS) LOW VOLTAGE TOO LONG |
| P1810 | TRANSMISSION FLUID PRESSURE (TFP) POSITION SWITCH ASSEMBLY MALFUNCTION |
| P1860 | TCC PWM SOLENOID ELECTRICAL MALFUNCTION |
| P1870 | TRANSMISSION COMPONENT SLIPPING |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.