1997 Chevrolet Corvette AutomaticFACTORY OEM SERVICE PROCEDURE

Engine Controls - Service & Adjustment Specifications 5.7L: Capacities

BATTERY SPECIFICATIONS

Application Engine Cold Crank Amps @ 0Β°F (-18Β°C) Reserve Capacity Minutes
5.7L (1) (1)
(1) Information not available at time of publication.
FLUID CAPACITIES

Application (1) Quantity - Qts. (L)
Crankcase (2) 6.5 (6.2)
Cooling System (Includes Heater) (3)
A/T 12.0 (11.4)
M/T 12.4 (11.7)
Automatic Transaxle/Transmission (4)(5)(6) 5.0 (4.7)
(1) Fluid capacities listed are approximate. Always fill to FULL mark.
(2) Includes oil filter capacity.
(3) Drain and refill capacity only.
(4) Does not include torque converter.
(5) Dexron-III or Dexron-IIE.
(6) Fill fluid level until even with bottom of fill plug hole with engine running at idle.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.