BATTERY SPECIFICATIONS

Application	Cold Crank Amps @ 0°F (-18°C)	Reserve Minutes
Corvette	525	90

FLUID CAPACITIES

Application

⁽¹⁾ Quantity: Qts. (L)

Crankcase ⁽²⁾

Engine Code "J" (LT5)

With Oil Filter Change

8.6 (8.1)

Without Oil Filter Change

7.6 (7.2)

Engine Code "P" (LT1)

With Oil Filter Change

4.5 (4.3)

Without Oil Filter Change

4.0 (3.8)

Cooling System (Includes Heater)

17.8 (16.9)

Automatic Transmission ⁽³⁾⁽⁴⁾

5.0 (4.7)

Manual Transmission

⁽⁵⁾ 2.2 (2.1)

⁽¹⁾	Fluid capacities listed are approximate. Always fill to FULL mark.

⁽²⁾

The 5.7L LT1 and LT5 engines are filled at the factory with Mobil(R) 1 synthetic oil which meets all requirements for these engines. Only use oils that are identified as meeting GM(R) standard 4718M and have either the "Starburst" symbol, or the API doughnut symbol with either the SH or SG designation.

⁽³⁾	Drain and refill capacity only. Does not include torque converter.

⁽⁴⁾	Dexron-III or Dexron-IIE.

⁽⁵⁾	Manual Transmission Fluid (GM 1052931).

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Engine Controls - Specifications: Capacities

Use the Manual With the Right Hardware

When to See a Mechanic

Rather have a pro handle this?