Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1993 Chevrolet Caprice Classic LSFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Refrigerant | 3.13 LBS. | 1.41 KG | R-12 | S | |||
| Automatic Transmission Fluid | Drain and Refill | 10.00 PTS. | 4.73 L | Automatic Transmission Fluid DEXRON IIE | S | ||
| Automatic Transmission Fluid | Overhaul | 22.40 PTS. | 10.59 L | Automatic Transmission Fluid DEXRON IIE | S | ||
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | S | |||
| Differential Gear Oil | 7.5" axle | 3.50 PTS. | 1.65 L | API - GL-5, SAE 80W-90 Gear Oil | S | ||
| Differential Gear Oil | 8.5" axle | 4.20 PTS. | 1.98 L | API - GL-5, SAE 80W-90 Gear Oil | S | ||
| Engine Coolant | 5.0L Eng | w/Heavy Duty Radiator | 17.30 QTS. | 16.37 L | 50/50 mixture of Ethylene Glycol Base Antifreeze and water | GM Specification 1825-M. | S |
| Engine Coolant | 5.0L Eng | w/o Heavy Duty Radiator | 16.70 QTS. | 15.8 L | 50/50 mixture of Ethylene Glycol Base Antifreeze and water | GM Specification 1825-M. | S |
| Engine Oil | w/Filter | 4.50 QTS. | 4.25 L | SAE 5W-30 (Preferred) (Below 0Deg.F to Above 100Deg.F), 10W-30 (0Deg.F to Above 100Deg.F) | Use oil that has been certified by the American Petroleum Institute. | S | |
| Engine Oil | w/o Filter | 4.00 QTS. | 3.78 L | SAE 5W-30 (Preferred) (Below 0Deg.F to Above 100Deg.F), 10W-30 (0Deg.F to Above 100Deg.F) | Use oil that has been certified by the American Petroleum Institute. | S | |
| Fuel Tank | Sedan | 23.00 GALS. | 87.06 L | S | |||
| Power Steering Fluid | N/A | N/A | GM Hydraulic Power Steering Fluid | S | |||
| Windshield Washer Fluid | N/A | N/A | Optikleen Windshield Washer Fluid | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.