Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1993 Chevrolet Camaro Base, StandardFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | w/Denso Compressor | 8.00 OZS. | 0.23 L | PAG 46 | S | ||
| Air Cond Compressor Oil | w/OE Harrison Compressor | 8.00 OZS. | 0.23 L | PAG 150 | S | ||
| Air Cond Refrigerant | 3.50 LBS. | 1.58 KG | R-12 | S | |||
| Automatic Transmission Fluid | 3.4L Eng | Overhaul | 16.70 PTS. | 7.9 L | Automatic Transmission Fluid DEXRON IIE | S | |
| Automatic Transmission Fluid | Drain and Refill | 10.00 PTS. | 4.73 L | Automatic Transmission Fluid DEXRON IIE | S | ||
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | S | |||
| Differential Gear Oil | 1.75 QTS. | 1.65 L | API - GL-5, SAE 80W-90 Gear Oil | S | |||
| Engine Coolant | 3.4L Eng,Standard Trans | 12.50 QTS. | 11.82 L | 50/50 mixture of Ethylene Glycol Base Antifreeze and water | GM Specification 1825-M. | S | |
| Engine Oil | 3.4L Eng | 4.00 QTS. | 3.78 L | SAE 5W-30 (Preferred) (Below 0Deg.F to Above 100Deg.F), 10W-30 (0Deg.F to Above 100Deg.F) | Use oil that has been certified by the American Petroleum Institute. | S | |
| Fuel Tank | 15.50 GALS. | 58.67 L | S | ||||
| Manual Transmission Fluid | 5 Spd Trans | 5.90 PTS. | 2.79 L | Automatic Transmission Fluid DEXRON IIE | S | ||
| Power Steering Fluid | N/A | N/A | GM Hydraulic Power Steering Fluid | S | |||
| Windshield Washer Fluid | N/A | N/A | Optikleen Windshield Washer Fluid | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.