Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1992 Chevrolet APVFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Refrigerant | Front & Rear | 4.13 LBS. | 1.87 KG | R-12 | S | ||
| Air Cond Refrigerant | Front | 3.13 LBS. | 1.41 KG | R-12 | S | ||
| Automatic Transmission Fluid | 3 Spd Trans | Overhaul | 7.00 QTS. | 6.62 L | Automatic Transmission Fluid DEXRON VI | Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. | S |
| Automatic Transmission Fluid | 3 Spd Trans | Pan Removal and Replacement | 4.00 QTS. | 3.78 L | Automatic Transmission Fluid DEXRON VI | Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. | S |
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | S | |||
| Engine Coolant | 3.1L Eng | Rear,w/Climate Control | 14.25 QTS. | 13.48 L | 50/50 mixture of Ethylene Glycol Base Antifreeze and water | GM Specification 1825-M. | S |
| Engine Coolant | 3.1L Eng | w/Air Cond | 12.75 QTS. | 12.06 L | 50/50 mixture of Ethylene Glycol Base Antifreeze and water | GM Specification 1825-M. | S |
| Engine Coolant | 3.1L Eng | w/Heater | 12.50 QTS. | 11.82 L | 50/50 mixture of Ethylene Glycol Base Antifreeze and water | GM Specification 1825-M. | S |
| Engine Oil | 4.00 QTS. | 3.78 L | SAE 10W-30 | Use oil that has been certified by the American Petroleum Institute. | S | ||
| Fuel Tank | 20.00 GALS. | 75.7 L | S | ||||
| Power Steering Fluid | 3.1L Eng | Complete System | 1.25 PTS. | 0.59 L | GM Power Steering Fluid | S | |
| Power Steering Fluid | 3.1L Eng | w/Pump | 1.00 PTS. | 0.47 L | GM Power Steering Fluid | S | |
| Windshield Washer Fluid | N/A | N/A | Optikleen Windshield Washer Fluid | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.