1990 Chevrolet Cavalier Z24, StandardFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Refrigerant 2.25 LBS. 1.02 KG R-12 S
Automatic Transmission Fluid Overhaul 6.90 QTS. 6.52 L Automatic Transmission Fluid DEXRON VI Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. S
Automatic Transmission Fluid Pan Removal and Replacement 4.00 QTS. 3.78 L Automatic Transmission Fluid DEXRON VI Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. S
Brake Fluid N/A N/A DOT 3 Brake Fluid S
Engine Coolant 3.1L Eng w/Air Cond 11.10 QTS. 10.5 L 50/50 mixture of Ethylene Glycol Base Antifreeze and water GM Specification 1825-M. S
Engine Coolant 3.1L Eng w/o Air Cond 11.00 QTS. 10.4 L 50/50 mixture of Ethylene Glycol Base Antifreeze and water GM Specification 1825-M. S
Engine Oil 3.1L Eng 5.00 QTS. 4.73 L SAE 5W-30 (Preferred) (Below -20Deg.F to Above 100Deg.F), 10W-30 (0Deg.F to Above 100Deg.F) Use oil that has been certified by the American Petroleum Institute. S
Engine Oil 3.1L Eng w/o Filter 4.00 QTS. 3.78 L SAE 5W-30 (Preferred) (Below -20Deg.F to Above 100Deg.F), 10W-30 (0Deg.F to Above 100Deg.F) Use oil that has been certified by the American Petroleum Institute. S
Fuel Tank 13.60 GALS. 51.48 L S
Manual Transmission Fluid 3.1L Eng Pan Removal and Replacement 2.60 QTS. 2.46 L Synchromesh Transmission Fluid S
Power Steering Fluid Complete 2.25 PTS. 1.06 L GM Power Steering Fluid S
Power Steering Fluid w/Pump 1.00 PTS. 0.47 L GM Power Steering Fluid S
Windshield Washer Fluid N/A N/A Optikleen Windshield Washer Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.