1983 Chevrolet Citation 2D Hatchback, 2.8 Z, AutomaticFACTORY OEM SERVICE PROCEDURE

System Testing

  1. Start engine and warm to normal operating temperature. Engine should be running at curb idle speed. Remove PCV valve from its mounting.
  2. If valve is functioning properly, a hissing noise will be heard as air is drawn through valve. Place finger over PCV valve inlet. A strong vacuum should be felt.
  3. If no vacuum is felt at PCV valve, check for blockage or restriction in PCV valve hose. If hose is okay, replace PCV valve. While finger is over inlet of valve, check for vacuum leaks in hose and at all connections.
  4. Turn engine off. Remove PCV valve from hose. Shake PCV valve. A clicking noise should be heard when shaking valve, indicating valve is free. If no clicking noise is heard, replace PCV valve.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.