Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1982 Chevrolet Chevette L4-111 1.8L DSLFACTORY OEM SERVICE PROCEDURE
Transaxle/Transmission, Automatic
TYPE AF(DEXRON-II (R) Automatic Transmission Fluid)
CAPACITY, Initial Refill*:
Front wheel drive 3.8 Liters 4.0 Quarts
180 Transmission 2.8 Liters 3.0 Quarts
200 Transmission 3.3 Liters 3.5 Quarts
350 Transmission 2.8 Liters 3.0 Quarts
700-R4 Transmission 4.7 Liters 5.0 Quarts
*With the engine at operating temperature, shift transmission through all gears. Let engine slow idle in PARK for 3 minutes or more. Check fluid level and add fluid as needed
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.