1975 Chevrolet Hi-Cube Automatic TransFACTORY OEM SERVICE PROCEDURE

Distributors & Ignition Systems: Specification

NOTE: FOR ENGINE RPM AND DEGREES, MULTIPLY SPECIFICATIONS BY 2
CHRYSLER CORP. DISTRIBUTOR ADVANCE SPECIFICATIONS

Distributor Part No. Rot (1) Automatic Advance (Distr. Degrees & RPM) Vacuum Advance (Distr. Deg. & In. of Hg.)
Deg. RPM Deg. RPM Deg. RPM Deg. In. Hg. Deg. In. Hg.
3656667 C 0.5-3.5 550 7.0-9.0 900 13.5-16.0 2200 1.0-3.5 9.5 7.0-10.0 14.0
3656672 C 0.5-3.5 550 5.0-7.5 800 11.5-14.0 2200 0.5-2.5 10.0 7.5-9.5 15.0
3755056 C 1.0-4.5 550 4.5-7.9 700 11.5-14.0 2200 1.5-5.0 11.0 5.0-8.0 12.5
3755157 CC 0.5-3.5 650 5.5-8.0 900 9.5-12.0 2000 1.0-4.0 10.5 8.0-10.5 15.5
3755201 C 0.5-3.0 550 2.5-5.0 700 11.5-14.0 2150 0.5-2.5 10.0 7.5-9.5 15.0
3874082 C 1.0-4.5 600 8.0-10.5 900 11.5-14.0 2200 0.5-2.5 7.0 7.0-10.0 11.5
3874090 C 1.5-5.5 550 5.5-8.0 700 11.5-14.0 2200 0.5-2.5 7.0 10.0-12.0 12.5
3874302 C 1.5-5.5 550 5.5-8.0 700 11.5-14.0 2200 0.5-2.5 9.0 9.5-12.5 15.5
3874323 C 0.5-3.0 550 2.5-5.0 700 11.5-14.0 2150 1.5-5.0 11.0 5.0-8.0 12.5
(1) C (Clockwise), CC (Counterclockwise) viewed from rotor end.
DELCO-REMY DISTRIBUTOR ADVANCE SPECIFICATIONS

Distributor Part No. Rot (1) Automatic Advance (Distr. Degrees & RPM) Vacuum Advance (Distr. Deg. & In. of Hg.)
Deg. RPM Deg. RPM Deg. RPM Deg. In. Hg. Deg. In. Hg.
1110650 C 0 550 7 1150 8 2100 0 4 7 12
1112494 C 0 550 7 1400 10 2100 0 10 7 17
1112863 C 0 550 3.5 1150 8 2100 0 4 9 12
1112869 C 0 550 7 1400 10 2100 0 6 10 15
1112880 C 0 600 6 1000 11 2100 0 4 9 12
1112884 C 0 575 8.5 1450 11 2100 0 8 5 13
1112886 C 0 900 6 2100 .. .. 0 4 9 17
1112887 C 0 550 7 1150 12 2100 0 10 5 13
1112888 C 0 550 6 800 8 2100 0 4 9 12
1112940 C 0 600 7.5 1350 10 2100 0 4 7.5 15.5
1112941 C 0 500 4 800 9.5 1725 0 8 5 13
1112943 C 0 550 5.5 1200 9 2100 0 6 10 15
(1) C (Clockwise), CC (Counterclockwise) viewed from rotor end.
FORD MOTOR CO. DISTRIBUTOR ADVANCE SPECIFICATIONS

Distributor Part No. Rot (1) Automatic Advance (Distr. Degrees & RPM) Vacuum Advance (Distr. Deg. & In. of Hg.)
Deg. RPM Deg. RPM Deg. RPM Deg. In. Hg. Deg. In. Hg.
D4TE-NA CC ..... 500 ..... 1000 ..... 1500 ..... 5 ..... 15
D5TE-AA C ..... 500 ..... 1000 ... 1500 ..... 5 ..... 15
D5TE-AAA C -1-6.5 500 4.8-7 1000 7.2-9.5 1500 0.0-3.2 5 2.8-5.2 15
D5TE-ABA CC -1-0.5 500 .0.0-2.8 1000 3.5-6.2 1500 0.0-1.3 5 8.8-12 15
D5TE-AEA CC -1-0.5 500 5.7-7.8 1000 8.4-10.6 1500 0.0-4 5 8.8-11.2 15
D5TE-AFA CC ..... 500 ..... 1000 ..... 1500 ..... 5 ..... 15
D5TE-AGA CC -1-0.5 500 -1-1 1000 6.8-8.8 1500 0.0-1.8 5 6.8-9.2 15
D5TE-AKA CC -0.8-0.5 500 -0.8-1.6 1000 3-5.5 1500 0.0-1 5 4.8-7.2 15
D5TE-DA CC -1-0.5 500 1-3 1000 3.5-5.8 1500 0.0-1 5 4.8-7.3 15
D5TE-EA CC -1.2-1.5 500 8-10 1000 11.8-14 1500 0.0-3 5 2.8-4.2 15
D5TE-FA C -1-0.5 500 2.4-4.4 1000 3.8-6 1500 0.0-1.2 5 6.8-9.4 15
D5TE-JA CC ..... 500 ..... 1000 ..... 1500 ..... 5 ..... 15
D5TE-LA CC -1-1.2 500 5.8-8 1000 8.5-10.8 1500 0.0-1.2 5 6.8-9.4 15
D5TE-MA C -1-0.5 500 4-6 1000 6.2-8.5 1500 0.0-2.2 5 4.8-7.3 15
D5TE-NA C -1-0.5 500 5-6.8 1000 7.2-9.5 1500 0.0-3 5 4.8-7.2 15
D5TE-PA CC -1.2-0.3 500 5.5-7.6 1000 8.4-10.6 1500 3.2-6.6 5 6.8-9.2 15
D5TE-RA CC -1-1.4 500 5.8-8 1000 8.5-10.7 1500 0.0-1.2 5 6.8-9.2 15
D5TE-SA CC -1-0.5 500 3.2-5.2 1000 7.3-9.5 1500 0.0-1.1 5 8.8-11.3 15
D5TE-TA CC -1-0.5 500 1.4-3.4 1000 3.3-5.7 1500 0.0-1 5 6.2-9.2 15
D5TE-UA C -1-0.5 500 -1.2-1 1000 5-7.1 1500 0.3-4 5 5.3-7.2 15
D5TE-ZA CC -1-0.5 500 4.5-6.6 1000 7.2-9.5 1500 3-6.3 5 6.8-9.4 15
D5TZ-C CC ..... 500 ..... 100 ..... 1500 ..... 5 ..... 15
D5TZ-T CC ..... 500 ..... 1000 ..... 1500 ..... 5 ..... 15
D5TZ-Y CC ..... 500 ..... 1000 ..... 1500 ..... 5 ..... 15
D5UE-BA CC -1-0.4 500 1-2.6 1000 3.5-6 1500 0.0-1.3 5 9.1-12.6 15
D5UE-CA CC -1-0.5 500 -1.8-0.5 1000 3.4-6 1500 0.0-1.3 5 2.8-5.3 15
D5UE-DA CC -0.8-0.5 500 1-3.6 1000 4.5-7 1500 0.0-3.1 5 10.7-13.2 15
D5UE-EA CC -1-0.5 500 -2-0.5 1000 3.4-6 1500 0.0-1.3 5 5.5-8.5 15
(1) C (Clockwise), CC (Counterclockwise) viewed from rotor end.
I.H.C. - HOLLEY DISTRIBUTOR ADVANCE SPECIFICATIONS

Distributor Part No. (2) Rot (1) Automatic Advance (Distr. Degrees & RPM) Vacuum Advance (Distr. Deg. & In. of Hg.)
Deg. RPM Deg. RPM Deg. RPM Deg. In. Hg. Deg. In. Hg.
448686 C 1.5-3.9 500 8.3-10.3 1000 12-14 1800 3-6 9 4-6 11
461270 C 1-3 550 6-8 900 9.6-11.6 1200 0-1.5 6 1.5-4.5 8
461271 C 0-1 400 4-6 700 10.4-12.4 2000 0-1.5 6 1.5-4.5 8
461272 C 0-1 400 4-6 700 10.4-12.4 2000 0-1.5 6 1.5-4.5 8
461273 C 0-1 400 4-6 700 10.4-12.4 2000 0-1.5 6 2.7-5.7 9
463330 C 0-2 400 4-6 700 10.5-12.5 2000 0-1 6 3-6 9
463331 C 0-2 400 4-6 700 10.5-12.5 2000 0-1 6 3-6 9
463332 C 0-2 400 4-6 700 10.5-12.5 2000 0-1 6 3-6 9
464359 C 4-6 600 8.5-10.5 1000 15.2-17.2 1900 0-1.5 6 4-6 15
467034 C 3.4-5.4 700 8-10 1000 12-14 1800 2.8-8 8 6-8 9.5
467035 C 3.4-5.4 700 8-10 1000 12-14 1800 2.8-8 8 6-8 9.5
467073 C 1-3 600 5-7 1000 13-15 1800 5-8 10.5 6-8 19
519861 C 0-1 400 4-6 700 10.4-12.4 2000 0-1.5 6 2.7-5.7 9
(1) C (Clockwise), CC (Counterclockwise) viewed from rotor end.
(2) All part numbers end in C91.
PRESTOLITE DISTRIBUTOR ADVANCE SPECIFICATIONS

Distributor Part No. Rot (1) Automatic Advance (Distr. Degrees & RPM) Vacuum Advance (Distr. Deg. & In. of Hg.)
Deg. RPM Deg. RPM Deg. RPM Deg. In. Hg. Deg. In. Hg.
IDJ-4001 C 0-4.3 500 6.4-8.5 1000 14-16 2300 0-2.2 4-6 6.5-8.5 12.7
IDJ-4001-B C .4-2.9 500 8-10 1000 15-17 2200 0-2.6 5-7 6.5-8.5 12.5
IDJ-4001-C C 0-2 600 6-7.5 1000 13-15 2250 0-2.4 5-7 7-9 13.1
IDJ-4002-B C 0-2 500 7-9 1000 12-14 2250 0-2.4 5-7 7-9 13.1
IDJ-4002-C C 0 520 7.5-9.5 1000 12-14 2000 0 5-7 6.5-8.5 12.0
(1) C (Clockwise), CC (Counterclockwise) viewed from rotor end.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.