1969 Chevrolet Caprice Not Available, 5.3L Eng, Automatic Trans, Trans Mfr CD PowerglideFACTORY OEM SERVICE PROCEDURE

DELCO-REMY Distributor Advance Specifications

NOTE: FOR ENGINE RPM AND DEGREES, MULTIPLY SPECIFICATIONS BELOW BY 2.
Distributor Part No. Rot (1) Automatic Advance (Distr. Degrees & RPM) Vacuum Advance (Distr. Deg. & In. of. Hg.) Vacuum Unit No.
Deg. RPM Deg. RPM Deg. RPM Deg. RPM Start Deg. In.Hg. Max. Deg. In.Hg.
1110439 C 0-3 500 2.2-5.2 580 9.5-11.5 975 15-17 2100 0 6-8 11.5 15.5-17 1116217
1110444 C 0-3 350 0-3.5 400 8-10 1000 12-14 2000 0 5-7 11 15.5-17 1116207
1110452 C 0 450 .............................. .............................. 14 2100 0 7 12 15 1116217
1110453 C 0 350 .............................. .............................. 10 2100 0 7 12 15 1116217
1110454 C 0 450 .............................. .............................. 13 2200 0 7 12 15 1116217
1110455 C 0 400 .............................. .............................. 10 2400 0 7 12 15 1116217
1110457 C 0 450 8.5 850 .............................. 14 1850 0 7 12 15 ---
1110458 C 0 450 7 850 .............................. 12 1800 0 7 12 15 ---
1110459 C 0 500 3.5 600 10.5 1050 18 2300 0 7 11.5 16 ---
1110460 C 0 500 8.5 1050 .............................. 16 2300 0 7 11.5 16 ---
1110463 C 0-3 500 2.2-5.2 580 9.5-11.5 975 15-17 2100 0 6-8 12 17 1116217
1110464 C 0-2 510 1.5-3.5 600 7.5-9.5 975 13-15 2100 0 6-8 12 17 1116217
1110474 C 0-2 550 6-8 875 .............................. 11.5-13.5 2375 0 5-7 7.5 10.5-11.5 1973419
1110475 C 0-4.5 500 9-11 1050 .............................. 13-15 2200 0 5-7 7.5 10.5-11.5 1973419
1111106 C .6-2.6 500 7.5-9.5 925 .............................. 15-17 2200 0 4-6 12 18-19.3 1115362
1111198 C .5-2.5 450 7.5-9.5 800 .............................. 14-16 1950 0 4-6 12 18-19.3 1115362
1111253 CC 0-2 500 5-7 1000 .............................. 9-11 2300 0 10-12 10 17-18.8 1115374
1111334 C 0 550 8.5-10.5 900 .............................. 13-15 2300 0 6-8 7-9 16 ..............
1111335 C 0 550 9.5-11.5 900 .............................. 15-17 2300 0 6-8 7-9 16 ..............
1111341 (2) CC .5-2.5 450 7-9 1000 9-11 1900 7.8-11 3000 0 10-12 8.7 16.2-17.8 1973418
1111472 C .5-2.5 550 7.5-9.5 1000 .............................. 13-15 2000 0 4-6 12 18-19.3 1115362
1111473 C 0-2.5 450 8-10.5 790 8.5-10.6 805 14-16 2200 0 8-10 12.5 18.5-20.5 1115363
1111474 C 0-2 470 9.5-11.5 890 .............................. 15-17 2300 0 6-8 8 14.5-15.75 1116210
1111480 C 0 675 11 1100 .............................. 16 2200 0 8 7.5 15.5 ..............
1111481 C 0 500 5 800 .............................. 14 2150 0 6 7.5 12 ..............
1111482 C 0 500 5 700 .............................. 16 2150 0 6 1.5 12 ..............
1111483 C 0 450 6 1000 .............................. 14 2150 0 6 7.5 12 ..............
1111486 C 0 400 1.5 500 7.5 900 18 2050 0 7 6.5 17 ..............
1111487 C 0 450 1 650 4 700 16 2200 0 7 6.5 17 ..............
1111488 C 0 475 7 700 10 900 15 2350 0 10 5 17 ..............
1111489 C 0 450 4.5 650 7.5 750 13 2350 0 10 5 17 ..............
1111490 C 0 450 4.5 600 7.5 750 15 2550 0 8 5 17 ..............
1111491 (2) C 0-2 575 4-6 850 12-14 2500 11.3-14 3000 0 7-9 8 15-16 1116201
1111493 C 0-2 570 4-6 850 .............................. 12-14 2500 0 7 7.5 12 1115360
1111497 C 0 450 4.5 625 8.5 1000 16 2500 0 8 7.5 15.5 ..............
1111498 C 0 450 6.5 650 10.5 1000 18 2500 0 8 7.5 15.5 -
1111499 C 0 450 4.5 625 8.5 1000 16 2500 0 6 7.5 12 -
1111925 C 0 400 4 625 9.5 1000 13 1900 0 8 7.5 15.5 -
1111926 C 0 400 4 625 8.5 1000 13 1900 0 7 6 12 -
1111927 (2) C 0 600 8 950 14.5 2500 14.5 2500 ......................... .............................. None
1111928 (2) C 0 450 1 550 .............................. 15 1900 0 8 7.5 15.5 -
1111930 CC 0-2 400 6-8 900 .............................. 10-12 2000 0 8-10 9 16.5-18.5 1115361
1111932 CC .4-2.4 500 8-10 900 .............................. 10-12 2000 0 8-10 12 18.5-20.5 1973408
1111933 CC .5-2.5 450 7-9 1000 .............................. 9-11 1900 0 10-12 8 16-18 1973418
1111934 CC 0-2 400 6.5-8.5 1200 .............................. 13-15 2000 0 6-8 12 15-17.5 1973407
1111935 CC .4-2.4 700 ......................... .............................. 6-8 1500 0 8-10 12 18.5-20.5 1973408
1111936 CC 0-2 550 5-7 1000 9-11 1800 9-11 1800 0 8-10 12 18.5-20.5 1973408
1111938 C 0 450 9.5-11.5 975 .............................. 15-17 2300 0 6-8 7-9 16 ..............
1111939 C 0 300 7.25-9.25 975 .............................. 13-15 2200 0 8-11 12.75 16 ..............
1111940 CC .5-2.5 500 7.5-9.5 950 .............................. 15-17 2275 0 8-10 10 15-17 1115365
1111941 CC 0-2 660 5-7 1100 .............................. 10-12 2300 0 8-10 10 15-17 1115365
1111942 CC 1-3 550 6.5-8.5 975 .............................. 11-13 2400 0 6-8 10 13-14.75 ..............
1111945 CC 1.5-3.5 700 4-6 1000 .............................. 8-10 2500 0 8-10 10 15-17 1115365
1111946 CC 0-2 500 5-7 1000 .............................. 9-11 2300 0 10-12 10 17-18.8 1115374
1111948 C 0-1 400 0-2.5 450 8.5-10.5 800 14-16 2200 0 4-6 12 18-19.5 1115362
1111949 C 0 450 5.5 650 11 1000 19 2100 0 8 7.5 15.5 ..............
1111950 C 0 450 1.5 550 8.5 950 17 2150 0 8 7.5 15.5 ..............
1111951 CC 0-2 640 3.5-5.5 950 .............................. 8-10 2400 0 8-10 10 15-17 1115365
1111952 CC 1-3 700 5-7 1000 .............................. 9-11 2300 0 10-12 10 17-18.8 ..............
1111955 C 0 450 8.5 950 11 1000 16 2200 0 7 6.5 17 ..............
1111956 C 0 450 5 600 10.5 1000 16 2200 0 7 12 13 ..............
1111959 CC 0-2.2 550 4.5-6.5 1200 .............................. 10-12 2300 0 8-10 10 15-17 1115365
1111960 CC 1.3-3.3 700 6-8 1000 .............................. 10-12 2300 0 10-12 10 17-18.8 ..............
1111961 CC 0-1.8 400 1.7-4 500 2.2-4.2 520 14-16 2000 0 8-10 12.5 18.5-20.5 1973408
(1) C (Clockwise), CC (Counterclockwise) viewed from rotor end.
(2) Breakerless (Pulse Generator) distributors used with Transistor or Capacitor Ignition Systems.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.