1966 Chevrolet Biscayne 7.0L Eng, Automatic Trans, Trans Mfr CD THM400FACTORY OEM SERVICE PROCEDURE

DELCO-REMY Distributor Advance Specifications

NOTE: FOR ENGINE RPM AND DECREES, MULTIPLY SPECIFICATIONS BELOW BY 2.
Distributor Part No. Rot. (1) Automatic Advance (Distr. Degrees & RPM) Vacuum Advance (Distr. Deg. & In. of Hg.) Vacuum Unit Part No.
Deg. RPM Deg. RPM Deg. RPM Deg. RPM Start Deg. In.Hg. Max. Deg. In.Hg.
1110280 C 0-2 450 4-6 600 6.5-8.5 750 14-16 1500 0 5-7 11.5 11-13.5 1116198
1110292 C .5-2.5 400 6-8 750 9.5-11.5 1300 13-15 1850 0 5-7 11.5 11-13.5 1116198
1110310 C 0-2 450 .................... 7-9 1350 13-15 2100 0 5-7 12 12.75-14.75 1116229
1110311 C 0-2 975 5-7 1600 .................... 9-11 2100 0 6-8 12 14-16 1116230
1110319 C 0-2 500 1-3 600 5-7 1500 9-11 2400 0 6-8 12 14-16 1116230
1110323 C .5-2.5 400 6-8 750 9.5-11.5 1300 13-15 1850 0 5-7 11.5 11-13.5 1116198
1110324 C 0-2 375 5-7 700 .................... 12-14 1150 0 5-7 11.5 11-13.5 1116198
1110329 C 0 2000 .................... .................... 9 2300 0 (3)2 12(4) (3)4.5 1116245
1110330 C 0 400 .................... .................... 9 1400 0 6 11 14 1116248
1110339 C 0 800 4 1200 .................... 18 3200 0 7 12 15 1116230
1110340 C 0-2 475 7-9 950 .................... 12-14 2200 0 5-7 11 16-17 1116207
1110341 C 0-2 475 8-10 1050 .................... 10-12 2400 0 4-6 10 11.25-12.25 1115353
1110342 C 0 700-950 7-9 1800 .................... 12-14 4200 0 6-8 7-9 16 1116210
1110343 C 0-3.5 500 13-15 1050 .................... 15-17 2400 0 4-6 10 11.25-12.25 1115353
1110344 C .5-3.5 500 7.5-9.5 1040 .................... 9-12 3000 0 4-6 10 11-12.75 1115354
1110351 C 0 450 7.5 800 11-5 1150 14 1400 0 6 10 14.5 1116235
1110360 C 0 450 4.5 600 .................... 13 1150 0 6 10 14.5 1116235
1110362 C 0 450 5.5 650 7.5 750 15 1600 0 6 10 14.5 1116235
1110366 C 0-3.75 400 3.25-5 500 9.5-11.5 950 14.5-16.5 2200 0 5-7 11 16-17 1116207
1110368 C 0-4.2 500 7-11.5 660 10.2-12.2 740 23-25 2200 0 5-7 12 13.5-14.3 1116229
1110369 C 0-2.6 500 5-7.8 690 6.2-8.2 730 19-21 2200 0 6-8 12 14.5-15.5 1116230
1110370 C 0-3 500 5-7.8 680 6-8 710 17-19 2500 0 6-8 12 14.5-15.5 1116230
1110371 C 0-4 500 7-11 675 9.4-11.4 740 15-17 1500 0 5-7 11 13.8-14 1116248
1110372 C 0-3.6 500 6.4-9.8 670 8-10 710 19-21 2500 0 6-8 12 14.5-15.5 1116230
1110373 C 0-4.5 500 3.5-7.8 575 7-9 650 14-16 1125 0 5-7 10 14.2-14.5 1116235
1110376 C 0 700-950 7-9 1800 .................... 12-14 4200 0 6-8 7-9 16 1116210
1110378 C 0-2 475 8-10 1050 .................... 10-12 2400 0 4-6 10 11.25-12.25 1115353
1110379 C 0-3.5 500 13-15 1050 .................... 15-17 2400 0 4-6 10 11.25-12.25 1115353
1110380 C .5-3.5 500 7.5-9.5 1040 .................... 9-12 3000 0 4-6 10 11-12.75 1115354
1111015 C 0-2 450 2.5-4.5 600 9-11 1200 14-16 2000 0 7-9 8 15-16 1116201
1111025 CC 0-2 350 7.5-9.5 775 12-14 1300 17-19 1900 0 5-7 10 14.25-15.75 1116212
1111029 CC 0-2 400 7.7-9.7 1025 .................... 14-16 2000 0 7-9 9.5 15-16.6 1116232
1111042 CC 0-2 400 6-8 900 .................... 10-12 2000 0 6-8 9 15.5-19.5 1116232
1111047 CC 0-2 400 7-9 1000 10-12 2200 9.2-12(2) 3000 0 8-10 0 14.75-16.75 1116172
1111048 CC 0-2 400 7.5-9.5 1000 .................... 12-14 2100 0 7-9 15.5 16.5-19.25 1116226
1111054 CC .5-2.5 450 7-9 1000 8-10 1450 10-12 2300 0 8-10 10 14.75-16.75 1116172
1111055 C 0 300-400 6.5-8.5 700 .................... 14-16 1900 0 3-4 7-9 8 1116210
1111074 C 0-2 550 6.5-8.5 900 13-15 2300 12-15 3000 0 6 7-8 12 1115355
1111077 CC 0-2 400 8.5-10.5 950 .................... 13-15 2300 0 6-8 10 13-14.5 1115037
1111078 CC 0-2 480 .................... 6-8 1000 10-12 2300 0 6-8 10.5 13-15 1116173
1111079 CC 0-2 400 6-8 950 .................... 11-13 2300 0 8-10 10 14.75-16.75 1116172
1111080 CC 0-2 480 6-8 1000 10-12 2300 9-12(2) 3000 0 8-10 10 14.75-16.75 1116172
1111081 CC 0-2 400 9-11 1000 .................... 10.2-13 3000 0 8-10 10 14.75-16.75 1116172
1111087 C .5-2.5 450 6.5-8.5 750 .................... 12-14 2050 0 3-5 8.2 5.7-8.2 1116236
1111088 C 0-2 425 7-9 800 13-15 2300 12-15 3000 0 3-5 8.2 5.7-8.2 1116236
1111089 CC 0-2 400 .................... .................... 13-15 2000 0 6-8 9 15.5-19.5 1116232
1111090 CC 0-2 480 6-8 1000 .................... 10-12 2300 0 6-8 10 13-14.5 1116242
1111093 C 0-2 550 6.5-8.5 900 13-15 2300 12-15 3000 0 6 7-8 12 1115355
1111100 C 0-2 500 7-9 950 .................... 13-15 2200 0 7-9 8 15-16 1116201
1111102 CC 0-6.8 500 13.5-15.5 950 .................... 18-20 2300 0 6-8 10 13-14.5 1116242
1111103 CC 0-5 500 11-13 1000 .................... 15-17 2300 0 8-10 10 15-17 1116243
1111107 C .5-2.5 450 6.5-8.5 750 .................... 12-14 2050 0 7-9 8 15-16 1116201
1111108 C 0-2 425 6.5-8.5 750 .................... 14-16 2550 0 3-5 8.2 5.7-8.2 1116236
1111109 C 0 450 7 650 9.5 800 15 2500 0 8 10 17 1115357
1111112 C 0 450 7 650 9.5 800 15 2500 0 6 7.5 12 1115355
1111116 C 0-6.2 500 3.2-9.5 550 11.5-13.5 750 17-19 2050 0 7-9 8 15-16 1116201
1111117 C 0-6.3 500 3.1-9.5 550 11.5-13.5 750 19-21 2550 0 5-7 8 11.2-12.7 1115355
1111130 CC 0-2 350 4.25-6.5 450 9.75-11.75 750 19-21 1850 0 5-7 10 14.25-15.75 1116212
1111131 C 0-1.5 400 .................... .................... 7-9 2000 0 7.5-9.5 12 15 1116192
1111134 C 0-2 425 6.5-8.5 750 .................... 14-16 2550 0 5-7 8 11.2-12.7 1115355
1111137 C 0 450 7 650 9.5 800 15 2500 0 8 10 17 1115357
1111138 C 0 450 7 650 9.5 800 15 2500 0 7 6 12 1115360
1111139 C 0 450 7 650 9.5 800 15 2500 0 7 6 12 1115360
1111140 C 0 450 7 650 9.5 800 15 2500 0 6 7.5 12 1115355
1111141 C 0 450 7 600 9.5 800 15 2500 0 6 7.5 12 1115355
1111142 C 0 450 7 600 9.5 800 15 2500 0 6 7.5 12 1115355
1111144 C 0 275-425 5-7 850 .................... 13-15 2300 0 6-8 7-9 16 1116210
1111147 C 0 275-375 6-8 700 .................... 15-17 2300 0 6-8 7-9 16 1116210
1111150 C 0 450 3.5 600 8 1000 14 2200 0 8 7.5 15.5 1116201
1111151 CC 0-2 600 3.5-5.5 900 .................... 8-10 2100 0 8-10 9 16.5-18.5 1115361
1111152 C 0 450 7.5 750 .................... 13 2050 0 8 7.5 15.5 1116201
1111153 C 0 450 7.5 750 .................... 13 2050 0 6 7.5 12 1115355
1111154 C 0 450 7.5 750 .................... 15 2550 0 6 7.5 12 1115355
1111155 C 0 450 7.5 750 .................... 15 2550 0 6 7.5 12 1115355
1111156 C 0 450 7.5 750 .................... 15 2550 0 4 8 8 1116236
1111157 C 0 450 7.5 750 .................... 15 2550 0 4 8 8 1116236
1111158 C 0 275-375 6-8 700 .................... 15-17 2300 0 6-8 7-9 16 1116210
1111159 C 0 275-425 5-7 850 .................... 13-15 2300 0 6-8 7-9 16 1116210
(1) C - Clockwise; CC - Counterclockwise (viewed from rotor end).
(2) Decrease 0.5° for each 500 RPM increase above this maximum.
(3) PSI (Pounds per square inch).
(4) Retard.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.