2018 Cadillac CTS Base, AWDFACTORY OEM SERVICE PROCEDURE

Removal Procedure

  1. GM4789530Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Center Compartment Liner(1) - Remove

  2. Wireless Charging System Module Bracket Bolt(2) - Remove [2x]
  3. Disconnect the electrical connector.
  4. Wireless Charging System Module Bracket(3) - Remove
  5. GM4789534Courtesy of GENERAL MOTORS COMPANY

    Wireless Charging System Module Bracket Bolt(1) - Remove [4x]

  6. Wireless Charging System Module(2) - Remove
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.