Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2017 Cadillac CTS Base, AWDFACTORY OEM SERVICE PROCEDURE
Fastener Specifications
WARNING: This page is about a different car, the 2016 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
| Application | Specifications | |
|---|---|---|
| Metric | English | |
| Sunroof Actuator Motor Bolts | 4 N.m | 35 lb in |
| Sunroof Frame Front Bolts | 9 N.m | 80 lb in |
| Sunroof Frame Rear Bolts | 9 N.m | 80 lb in |
| Sunroof Frame Side Bolts | 9 N.m | 80 lb in |
| Sunroof Sunshade Bolts | 4 N.m | 35 lb in |
| Sunroof Sunshade Motor Bolts | 4 N.m | 35 lb in |
| Sunroof Window Screws | 5 N.m | 44 lb in |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.