2017 Cadillac CTS Base, AWDFACTORY OEM SERVICE PROCEDURE

HVAC Assembly Components

HVAC Assembly Components

Items
1. M37 Mode Door Actuator M37 Mode Door Actuator
2. M37B Mode Door Actuator - Auxiliary (CJ4) M37B Mode Door Actuator - Auxiliary (CJ4)
3. M6L Air Temperature Door Actuator - Left M6L Air Temperature Door Actuator - Left
4. M46 Air Recirculation Door Actuator M46 Air Recirculation Door Actuator
5. B39 A/C Evaporator Temperature Sensor B39 A/C Evaporator Temperature Sensor
6. M8 Blower Motor M8 Blower Motor
7. M6B Air Temperature Door Actuator - Auxiliary (CJ4) M6B Air Temperature Door Actuator - Auxiliary (CJ4)
8. B7E Air Temperature Sensor - Duct Right Lower B7E Air Temperature Sensor - Duct Right Lower
9. B7D Air Temperature Sensor - Duct Left Lower B7D Air Temperature Sensor - Duct Left Lower
10. M6R Air Temperature Door Actuator - Right M6R Air Temperature Door Actuator - Right
Fig 1: HVAC Assembly Components
GM4703098Courtesy of GENERAL MOTORS COMPANY
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.