2012 Cadillac SRX AWDFACTORY OEM SERVICE PROCEDURE

Installation Procedure

Assemble the fuel system as follows:

  1. Install the fuel injectors and fuel rail. Refer to Refer to Fuel Injection Fuel Rail Assembly Replacement - Bank 1 (LF1, LFW) , and Fuel Injection Fuel Rail Assembly Replacement - Bank 2 (LF1, LFW) .
  2. Install the fuel module assemblies. Refer to Primary Fuel Tank Module Replacement (China) , and Secondary Fuel Tank Module Replacement .
  3. If required, install the fuel filter. Refer to Fuel Filter Replacement (China) .
  4. Refer to Metal Collar Quick Connect Fitting Service  in order to connect the following quick connect fittings to the fuel rail:
    • The feed hose/pipe
    • The return hose/pipe
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.