Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Cadillac Escalade EXTFACTORY OEM SERVICE PROCEDURE
Fastener Tightening Specifications
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Brake Caliper Bleeder Valve | 10 N.m | 89 lb in |
| Brake Caliper Bracket Bolt - Front | 185 N.m | 136 lb ft |
| Brake Caliper Bracket Bolt - Rear | 120 N.m | 89 lb ft |
| Brake Caliper Guide Pin Bolt - Front | 27 N.m | 20 lb ft |
| Brake Caliper Guide Pin Bolt - Rear | 27 N.m | 20 lb ft |
| Brake Hose Fitting Bolt - Front | 52 N.m | 38 lb ft |
| Brake Hose Fitting Bolt - Rear | 52 N.m | 38 lb ft |
| Brake Rotor Screw | 10 N.m | 89 lb in |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.