2012 Cadillac Escalade EXTFACTORY OEM SERVICE PROCEDURE

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Application Specification
Metric English
AM/FM Stereo and Clock and Audio Disc Player Radio Control Screws 2.5 N.m 22 lb in
Communication Interface Module Nut 9 N.m 80 lb in
Digital Radio and Mobile Telephone and Vehicle Location Base Assembly Nut 10 N.m 89 lb in
Front Overhead Console Reinforcement Bracket Screw 2 N.m 18 lb in
Radio and Video and Audio Disc Player and Navigational Information Display Screw 2.5 N.m 22 lb in
Radio Front Side Door Speaker Bolt/Screw 2.5 N.m 22 lb in
Radio Front Speaker Bolt/Screw 2.5 N.m 22 lb in
Radio Rear Side Door Speaker Bolt/Screw 2.5 N.m 22 lb in
Radio Rear Speaker Bolt/Screw 1.5 N.m 13 lb in
Radio Screws 9 N.m 80 lb in
Radio Speaker Amplifier Nut 6 N.m 54 lb in
Television Antenna Amplifier Bolt 10 N.m 89 lb in
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.