Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Cadillac Escalade AWD V8-6.2LFACTORY OEM SERVICE PROCEDURE
System Specifications
AUTOMATIC TRANSMISSION FLUID CAPACITY
6L80 - RPO MYC AUTOMATIC TRANSMISSION
Pan Removal 5.7 liters (6.0 quarts)
Overhaul 9.9 liters (10.5 quarts)
Complete Trans System 11.7 liters (12.4 quarts)
6L90 - RPO MYD AUTOMATIC TRANSMISSION
Pan Removal 6.0 liters (6.3 quarts)
Overhaul 9.9 liters (10.5 quarts)
Complete Trans System 11.7 liters (12.4 quarts)
2ML70 - RPO M99 AUTOMATIC TRANSMISSION
Drain Plug Only 9.93 liters (10.5 quarts)
Drop Pan and Filter 10.88 liters (11.5 quarts)
Dry Transmission (Empty) 12.30 liters (13.0 quarts)
NOTE: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck fluid level after filling.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
