2011 Cadillac Escalade EXTFACTORY OEM SERVICE PROCEDURE

Body Control Module (BCM) C6

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Body Control Module (BCM) C6 Connector End View
GM1664502Courtesy of GENERAL MOTORS CORP.
Body Control Module (BCM) C6 Connector Parts Information

Connector Part Information 
  • OEM: 15482793
  • Service: 88988842
  • Description: 25-Way F HIT Series (PK)
Terminal Part Information 
  • Pins: 1-5
  • Terminal/Tray: SNAC-A061T-M2.8/20
  • Core/Insulation Crimp: C/A
  • Release Tool/Test Probe: 12094429/J-35616-4A (PU)
  • Pins: 6-25
  • Terminal/Tray: SNAC3-A021T-M0.64/20
  • Core/Insulation Crimp: J/J
  • Release Tool/Test Probe: 12094429/J-35616-64B (L-BU)
Body Control Module (BCM) C6 Connector Terminal Identification

Pin Wire Color Circuit No. Function
1 - - Not Used
2 L-BU 20 Stop Lamp Supply Voltage
3-11 - - Not Used
12 PK/BK 1303 Liftgate Ajar Switch Signal (E52 Except E61)
13 GY 5797 Rear Closure Handle Switch Open Signal (E52 Except E61)
14 L-GN/BK 748 Right Rear Door Ajar Switch Signal
15 L-BU/BK 747 Left Rear Door Ajar Switch Signal
16 OG 5922 Non-Driver Door Open Switch Signal
17-21 - - Not Used
22 L-GN 5926 Rear Access Open Switch Signal (E52 Except E61)
23 - - Not Used
24 PK 6190 Lift Glass/Trunk Exterior Release Signal (E52 Except E61)
25 - - Not Used
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.