Body Control Module (BCM) X7

2011 Cadillac Escalade Base, AWDSECTION Body Control Module (BCM) X7
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Body Control Module (BCM) X7 Connector End View
GM1664505Courtesy of GENERAL MOTORS CORP.
Body Control Module (BCM) X7 Connector Parts Information

Connector Part Information 
  • OEM: 15466053
  • Service: See Catalog
  • Description: 28-Way F Receptacle 0.64 Series (GY)
Terminal Part Information 
  • Pins: 6-7, 9, 11-12, 15, 18-19, 21, 23, 26-28
  • Terminal/Tray: SNAC3-A021T-M0.64/20
  • Core/Insulation Crimp: J/J
  • Release Tool/Test Probe: 12094429/J-35616-64B (L-BU)
Body Control Module (BCM) X7 Connector Terminal Identification

Pin Wire Color Circuit No. Function
1-5 - - Not Used
6 0.35 L-BU 5921 Driver Door Unlock Relay Control (AU3 -AN3/DL3)
7 0.35 L-BU 195 Door Lock Control
8 - - Not Used
9 0.35 WH 194 Door Unlock Control
10 - - Not Used
11 0.35 OG/BK 781 Driver Door Lock Switch Unlock Signal (AU3 -AN3/DL3)
12 0.35 PK/BK 780 Driver Door Lock Switch Lock Signal (AU3 -AN3/DL3)
13-14 - - Not Used
15 0.5 PU 5059 Intrusion Sensor Alarm ON Signal (SPO Alarm)
16-17 - - Not Used
18 0.35 L-GN 170 Power Window Master Switch Right Rear Up Signal (AN3/DL3 +Crew Cab +A31/Extended Cab +ABV)
19 0.35 PU 169 Power Window Master Switch Left Rear Down Signal (AN3/DL3 +Crew Cab +A31/Extended Cab +ABV)
20 - - Not Used
21 0.35 D-BU 1307 Power Window Master Switch Lockout Signal (AN3/DL3 +Crew Cab +A31/Extended Cab +ABV)
22 - - Not Used
23 0.35 TN 126 Left Front Door Open Switch Signal (-AN3/DL3)
24-25 - - Not Used
26 0.35 PU 171 Power Window Master Switch Right Rear Down Signal (AN3/DL3 +Crew Cab +A31/Extended Cab +ABV)
27 0.35 L-BU/WH 280 Power Window Master Switch Lockout Right Rear Signal (AN3/DL3 +Crew Cab +A31/Extended Cab +ABV)
28 0.35 D-GN 168 Power Window Master Switch Left Rear Up Signal (AN3/DL3 +Crew Cab +A31/Extended Cab +ABV)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.