Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBâ—Ź LIVE
HOMESERVICE MANUALSCADILLAC2011ESCALADE BASE, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 794 (DATA COMMUNICATION SYSTEM)VISUAL IDENTIFICATIONDATA COMMUNICATION CONNECTORSBODY CONTROL MODULE (BCM) C5
2011 Cadillac Escalade Base, AWD
Body Control Module (BCM) C5
2011 Cadillac Escalade Base, AWDSECTION Body Control Module (BCM) C5
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Body Control Module (BCM) C5 Connector Parts Information
Connector Part InformationÂ
|
Terminal Part InformationÂ
|
Body Control Module (BCM) C5 Connector Terminal Identification
| Pin | Wire Color | Circuit No. | Function |
|---|---|---|---|
| 1 | YE/BK | 1334 | Left Rear Turn Signal Lamp Supply Voltage (X88/Z88/Z75 Export w/E52) |
| YE | 18 | Left Rear Stop/Turn Lamp Supply Voltage (X88 Except E52/Domestic Z75) | |
| 2 | D-GN/WH | 1335 | Right Rear Turn Signal Lamp Supply Voltage (X88/Z88/Z75 Export w/E52) |
| D-GN | 19 | Right Rear Stop/Turn Lamp Supply Voltage (X88 Except E52/Domestic Z75) | |
| 3 | - | - | Not Used |
| 4 | L-BU/WH | 1314 | Left Front Turn Signal Lamp Supply Voltage |
| 5 | L-BU | 1320 | CHMSL Supply Voltage |
| 6 | L-BU/WH | 6311 | Cruise/ETC/TCC Brake Signal |
| 7 | WH | 2282 | Headlamp Washer Relay Control (CE4) |
| 8 | PK | 5076 | Current Sensor Supply Voltage |
| 9 | WH | 5075 | Current Sensor Signal |
| 10 | BN | 5077 | Current Sensor Low Reference |
| 11 | YE | 43 | Accessory Voltage |
| 12 | - | - | Not Used |
| 13 | OG | 300 | Ignition 3 Voltage |
| 14 | WH | 2283 | Rear Wiper/Washer Switch Supply Voltage |
| 15 | PU | 5531 | Hood Closed Switch Signal |
| 16 | L-BU | 1134 | Park Brake Switch Signal |
| 17 | YE | 5356 | Left Tail Lamp Outage Detection Signal (Z75) |
| 18 | TN | 28 | Horn Relay Control |
| 19 | YE | 6812 | Out of Park Signal |
| 20 | GY | 91 | Windshield Wiper Switch Signal 2 |
| 21 | TN | 860 | Front Windshield Wiper Switch High Signal |
| 22 | - | - | Not Used |
| 23 | PK/WH | 1970 | Headlamp Low Beam Relay Control |
| 24 | D-BU | 45 | Park Lamp Relay Control |
| 25 | - | - | Not Used |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.