SYS.OK|MANUAL.DBâ—Ź LIVE
HOMESERVICE MANUALSCADILLAC2011ESCALADE BASE, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 774 (OBJECT DETECTION SYSTEM)COMPONENT LOCATOROBJECT DETECTION CONNECTORSOBJECT ALARM MODULE C2 (UD7)
2011 Cadillac Escalade Base, AWD

Object Alarm Module C2 (UD7)

2011 Cadillac Escalade Base, AWDSECTION Object Alarm Module C2 (UD7)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Object Alarm Module C2 (UD7) Connector End View
GM1715212Courtesy of GENERAL MOTORS CORP.
Object Alarm Module C2 (UD7) Connector Parts Information

Connector Part Information 
  • OEM: 13551679
  • Service: 19115653
  • Description: 8-Way F Kaizen 0.64 Series (GY)
Terminal Part Information 
  • Terminal/Tray: 7116-4618-02/14
  • Core/Insulation Crimp: P/P
  • Release Tool/Test Probe: J-38125-215/J-35616-64B (L-BU)
Object Alarm Module C2 (UD7) Connector Terminal Identification

Pin Wire Color Circuit No. Function
1 PU 2378 RR Corner Object Sensor Signal
2 D-GN 2377 RR Middle Object Sensor Signal
3 OG 2376 LR Middle Object Sensor Signal
4 D-BU 2374 Object Sensor Supply Voltage
5 YE 2375 LR Corner Object Sensor Signal
6-7 - - Not Used
8 GY 2379 Object Sensor Low Reference
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.