SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCADILLAC2011ESCALADE BASE, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 309 (PERSONALIZATION SYSTEM)DESCRIPTION AND OPERATIONDRIVER PERSONALIZATIONMEMORY SEAT PROGRAMMING
2011 Cadillac Escalade Base, AWD

Memory Seat Programming

2011 Cadillac Escalade Base, AWDSECTION Memory Seat Programming
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Perform the following actions in order to program the memory seats for 2 separate drivers. Both outside mirrors and the radio station presets can also be programmed with the seat position:

  1. Move the seat to the desired position. Include the recliner, lumbar, and side wing area seat position.
  2. Press the correct memory seat button for the specific driver and hold for 3 seconds. After pressing the switch a double chime should be heard.
  3. Repeat the steps for the second driver.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.