Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
2009 Cadillac STS Base, 4.6 A, RWD
Quick Lookups: Fluids
2009 Cadillac STS Base, 4.6 A, RWDSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 4.70 OZS. | 0.13 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.38 LBS. | 0.62 KG | R-134a | S | |||
| Automatic Transmission Fluid | Trans Mfr CD 6L50/MYB | Drain and Refill | 6.70 QTS. | 6.34 L | Automatic Transmission Fluid DEXRON VI | All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling. | S |
| Automatic Transmission Fluid | Trans Mfr CD 6L50/MYB | Dry | 11.40 QTS. | 10.78 L | Automatic Transmission Fluid DEXRON VI | All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling. | S |
| Automatic Transmission Fluid | Trans Mfr CD 6L50/MYB | Overhaul | 11.20 QTS. | 10.59 L | Automatic Transmission Fluid DEXRON VI | All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling. | S |
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | S | |||
| Differential Gear Oil | Front,Dry Fill | 1.27 QTS. | 1.2 L | GL-5, SAE 75W-90 Synthetic Gear Oil | GM Part No. 12378261 or equivalent meeting GM Specifications: (9986115). With a complete drain and refill add 4 oz. of Limited-Slip Axle Lubricant Additive. | S | |
| Differential Gear Oil | Front,Wet Fill | 1.06 QTS. | 1 L | GL-5, SAE 75W-90 Synthetic Gear Oil | GM Part No. 12378261 or equivalent meeting GM Specifications: (9986115). With a complete drain and refill add 4 oz. of Limited-Slip Axle Lubricant Additive. | S | |
| Differential Gear Oil | Rear,Drain and Refill,w/Limited Slip Differential | 1.26 QTS. | 1.19 L | GL-5, SAE 75W-90 Synthetic Gear Oil | GM Part No. 12378261 or equivalent meeting GM Specifications: (9986115). Limited Slip Differential Additive: Drain and Refill with cover removed add: 3.38 oz. Drain and Refill with use of drain plug add: 2.37 oz. | S | |
| Differential Gear Oil | Rear,Drain and Refill,w/o Limited Slip Differential | 1.30 QTS. | 1.23 L | GL-5, SAE 75W-90 Synthetic Gear Oil | GM Part No. 12378261 or equivalent meeting GM Specifications: (9986115). | S | |
| Differential Gear Oil | Rear,Drain and Refill,w/use of Drain Plug | 1.16 QTS. | 1.09 L | GL-5, SAE 75W-90 Synthetic Gear Oil | GM Part No. 12378261 or equivalent meeting GM Specifications: (9986115). | S | |
| Engine Coolant | 4.6L Eng | 11.70 QTS. | 11.07 L | 50/50 mixture of DEX-COOL and clean drinkable water | All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling. | S | |
| Engine Oil | 4.6L Eng | w/Filter | 8.00 QTS. | 7.57 L | API - SAE 5W-30 | Use synthetic oil that meets GM Standard GM4718M. DO NOT use other viscosity oils such as SAE 20W-50. | S |
| Fuel Tank | 17.50 GALS. | 66.24 L | S | ||||
| Power Steering Fluid | N/A | N/A | GM Power Steering Fluid | GM Part No. 89021184. | S | ||
| Transfer Case Fluid | 0.90 QTS. | 0.85 L | Manual Transmission Fluid | GM Part No. 88861800. | S | ||
| Windshield Washer Fluid | N/A | N/A | Optikleen Windshield Washer Fluid | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.