Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2008 Cadillac STS VFACTORY OEM SERVICE PROCEDURE
Circuit/System Testing
- Ignition ON, verify that the Stoplamp Pedal Switch parameter in the ECM reads Applied while depressing the brake pedal.
- If the parameter reads Released, test the stop lamp switch signal circuit for a short to ground, an open/high resistance. If the circuit tests normal, replace the ECM.
- Ignition ON, release the brake pedal, verify that the Stoplamp Pedal Switch parameter reads Released.
- If the parameter reads Applied, test the stop lamp switch signal circuit for a short to voltage. If the circuit tests normal, replace the ECM.
- If all circuits test normal, replace the ECM.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.