WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Memory Seat Control Module & Components

Courtesy of GENERAL MOTORS CORP.

Memory Seat Control Module Replacement

Callout	Component Name
Preliminary Procedure: Remove the front driver seat. Refer to Front Seat Replacement - Bucket .
1	Driver Seat Adjuster Outer Finish Cover Refer to Front Seat Cushion Outer Trim Panel Replacement (Power) or Front Seat Cushion Outer Trim Panel Replacement (Manual) .
2	Driver Seat Adjuster Inner Finish Cover Refer to Front Seat Cushion Inner Trim Panel Replacement .
3	Driver Seat Riser Finish Cover Tip: Pull rearward to disengage the cover from the seat riser.
4	Driver Seat Cushion Cover and Pad Refer to Seat Cushion Trim Cover and Pad Replacement .
5	Memory Seat Module Nut (Qty: 4) NOTE: Refer to Fastener Notice . Tighten: 9 N.m (80 lb in)
6	Memory Seat Module Tip: Disconnect the electrical connector.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Memory Seat Control Module Replacement

Use the Manual With the Right Hardware

When to See a Mechanic

Rather have a pro handle this?