Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Cadillac Escalade EXTFACTORY OEM SERVICE PROCEDURE
Wheel Alignment Specifications
WARNING: This page is about a different car, the 2006 GMC Sierra, 2006 GMC Cab & Chassis Sierra, 2006 Chevrolet Silverado, and 2006 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Wheel Alignment Specifications
| Truck Line | Model | Caster L-R | Cross Caster, L-R | Camber | Cross Camber, L-R | Toe | Steering Wheel Angle | |
|---|---|---|---|---|---|---|---|---|
|
IMPORTANT:
Caster is relative to frame. The caster values must be compensated for the measured frame angle. Frame angle is positive when higher in the rear and negative when lower in the rear. Refer to Front Caster and Camber Adjustment .
|
||||||||
| C1500 | Silverado, Sierra w/16" Tires Reg, Ext Cab or Crew Cab |
3.75° +/- 1.00° | 4.00° +/- 1.00° | - 0.25° +/- 0.75° | +0.25° +/- 0.60° | 0.00° +/- 0.60° | +0.10° +/- 0.20° | - 1.0° +/- 3.5° |
| C1500HD | Silverado, Sierra w/16" Tires Crew Cab |
4.50° +/- 1.00° | 4.75° +/- 1.00° | -0.25° +/- 0.75° | +0.25° +/- 0.60° | 0.00° +/- 0.60° | +0.10° +/- 0.20° | -1.0° +/- 3.5° |
| K1500 | Silverado, Sierra w/16" Tires Reg, Ext Cab or Crew Cab |
3.80° +/- 1.00° | 4.10° +/- 1.00° | - 0.30° +/- 0.75° | +0.25° +/- 0.60° | 0.00° +/- 0.60° | +0.10° +/- 0.20° | - 1.0° +/- 3.5° |
| K1500 | Silverado, Sierra w/17" Tires Reg, Ext Cab or Crew Cab |
3.60° +/- 1.00° | 4.30° +/- 1.00° | -0.70° +/- 0.75° | +0.25° +/- 0.60° | 0.00°+/- 0.60° | +0.10° +/- 0.20° | - 1.0° +/- 3.5° |
| K1500 | Sierra Denali w/20" Tires | 3.50° +/- 1.00° | 4.50° +/- 1.00° | -1.00° +/- 0.75° | - 0.25° +/- 0.60° | 0.00° +/- 0.60° | +0.10° +/- 0.20° | - 1.0° +/- 3.5° |
| C1500/K 1500 | Silverado/Silverado SS/Sierra, w/20" Tires | 4.10° +/- 1.00° | 5.10° +/- 1.00° | -1.00° +/- 0.75° | -0.10° +/- 0.60° | 0.00° +/- 0.60° | +0.10° +/- 0.20° | - 1.0° +/- 3.5° |
| K1500HD | Silverado, Sierra Crew Cab |
4.25° +/- 1.00° | 4.50° +/- 1.00° | -0.25° +/- 0.75° | +0.25° +/- 0.60° | 0.00° +/- 0.60° | +0.10° +/- 0.20° | - 1.0° +/- 3.5° |
| C2500LD | Silverado, Sierra Reg or Ext Cab |
4.50° +/- 1.00° | 4.75° +/- 1.00° | -0.25° +/- 0.75° | +0.25° +/- 0.60° | 0.00° +/- 0.60° | +0.10° +/- 0.20° | - 1.0° +/- 3.5° |
| K2500LD | Silverado, Sierra Reg, Ext Cab or Crew Cab |
4.25° +/- 1.00° | 4.50° +/- 1.00° | -0.25° +/- 0.75° | +0.25° +/- 0.60° | 0.00° +/- 0.60° | +0.10° +/- 0.20° | -1.0° +/- 3.5° |
| C2500HD | Silverado, Sierra Reg, Ext Cab or Crew Cab |
4.25° +/- 1.00° | 4.50° +/- 1.00° | -0.25° +/- 0.75° | +0.25° +/- 0.60° | 0.00° +/- 0.60° | +0.10° +/- 0.20° | -1.0° +/- 3.5° |
| K2500HD | Silverado, Sierra Reg, Ext Cab or Crew Cab |
4.25° +/- 1.00° | 4.50° +/- 1.00° | -0.25° +/- 0.75° | +0.25° +/- 0.60° | 0.00° +/- 0.60° | +0.10° +/- 0.20° | -1.0° +/- 3.5° |
| C3500/3600 | Silverado, Sierra Reg, Ext Cab or Crew Cab |
4.25° +/- 1.00° | 4.50° +/- 1.00° | -0.25° +/- 0.75° | +0.25° +/- 0.60° | 0.00° +/- 0.60° | +0.10° +/- 0.20° | -1.0° +/- 3.5° |
| K3500/3600 | Silverado, Sierra w/Dually Reg, Ext Cab or Crew Cab |
4.25° +/- 1.00° | 4.50° +/- 1.00° | -0.25° +/- 0.75° | +0.25° +/- 0.60° | 0.00° +/- 0.60° | +0.10° +/- 0.20° | -1.0° +/- 3.5° |
| K3500/3600 | Silverado, Sierra Non-Dually Reg, Ext Cab |
4.50° +/- 1.00° | 5.00° +/- 1.00° | -0.50° +/- 0.75° | +0.25° +/- 0.60° | 0.00° +/- 0.60° | +0.10° +/- 0.20° | -1.0° +/- 3.5° |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.