Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2006 Cadillac XLR VFACTORY OEM SERVICE PROCEDURE
Rear Integration Module (RIM) - C3
WARNING: This page is about a different car, the 2006 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
Computer/Integrating Systems Connector End Views
Connector Part Information
|
Terminal Part Information
|
Rear Integration Module (RIM) - C3
| Pin | Wire Color | Circuit No. | Function |
|---|---|---|---|
| 1 | D-BU/WH | 1315 | Right Front Turn Signal Lamp Supply Voltage |
| 2 | L-BU/WH | 1314 | Left Front Turn Signal Lamp Supply Voltage |
| 3 | - | - | Not Used |
| 4 | RD/BK | 542 | Battery Positive Voltage |
| 5-9 | - | - | Not Used |
| 10 | D-GN | 5060 | Low Speed GMLAN Serial Data |
| 11 | - | - | Not Used |
| 12 | YE | 18 | Left Rear Stop/Turn Lamp Supply Voltage |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
