Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2006 Cadillac Escalade EXTFACTORY OEM SERVICE PROCEDURE
Wheel Alignment Specifications
Wheel Alignment Specifications
| Truck Line | Model | Caster | Cross Caster (L-R) | Camber | Cross Camber (L-R) | Total Toe | Steering Wheel Angle | |
|---|---|---|---|---|---|---|---|---|
| Left | Right | |||||||
|
IMPORTANT:
Caster is relative to frame, the caster values must be compensated for the measured frame angle. Frame angle is positive when higher in the rear and negative when lower in the rear. Refer to Front Caster and Camber Adjustment .
|
||||||||
| C1500 | Tahoe, Yukon, Yukon XL, Suburban, Avalanche w/16" tires | 3.90° +/- 1.00° | 4.70° +/- 1.00° | -0.80°+/- 0.50° | +0.25° +/- 0.50° | 0.00° +/- 0.50° | +0.10° +/- 0.20° | -1.0° +/- 3.5° |
| C1500 | Police Tahoe | 4.35° +/- 1.00° | 4.85° +/- 1.00° | -0.50°+/- 0.50° | -0.10° +/- 0.50° | 0.00° +/- 0.50° | +0.10° +/- 0.20° | -1.0° +/- 3.5° |
| C1500 | Avalanche w/ 17" tires | 4.10° +/- 1.00° | 4.70° +/- 1.00° | -0.60° +/- 0.50° | +0.25° +/- 0.50° | 0.00° +/- 0.50° | +0.10° +/- 0.20° | -1.0° +/- 3.5° |
| K1500 | Tahoe, Yukon, Yukon XL, Suburban, Avalanche w/16" tires | 3.60° +/- 1.00° | 4.40° +/- 1.00° | -0.80° +/- 0.50° | +0.25° +/- 0.50° | 0.00° +/- 0.50° | +0.10° +/- 0.20° | -1.0° +/- 3.5° |
| K1500 | Yukon XL, Suburban, Yukon Denali, Yukon Denali XL, Escalade, Escalade EXT, Avalanche w/17" tires | 3.80° +/- 1.00° | 4.50° +/- 1.00° | -0.70° +/- 0.50° | +0.25°+/- 0.50° | 0.00° +/- 0.50° | +0.10° +/- 0.20° | -1.0° +/- 3.5° |
| K1500 | Escalade, Escalade Platinum, Denali w/20" tires | 4.10 +/- 1.00 | 5.10 +/- 1.00 | -1.00 +/- 0.50° | -0.10° +/- 0.50° | 0.00° +/- 0.50° | +0.10° +/- 0.20° | -1.0° +/- 3.5° |
| C1500 | Escalade w/17" tires | 3.90° +/- 1.00° | 4.70° +/- 1.00° | -0.80° +/- 0.50° | +0.50° +/- 0.50° | 0.00° +/- 0.50° | +0.10° +/- 0.20° | -1.0° +/- 3.5° |
| C2500/K2500 | Suburban, Yukon XL, Avalanche | 4.50° +/- 1.00° | 4.75° +/- 1.00° | -0.25° +/- 0.50° | +0.25° +/- 0.50° | 0.00° +/- 0.50° | +0.10° +/- 0.20° | -1.0° +/- 3.5° |
| C/K 2500 | Suburban/Yukon XL with Rear Wheel Steering - Values are for the rear of the vehicle | - | - | - | -0.50° +/- 0.05° | - | 0.00° +/- 0.20° | -1.0° +/- 3.5° Thrust Angle 0.00° +/- 0.15° |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.