Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2006 Cadillac Escalade EXTFACTORY OEM SERVICE PROCEDURE
Scan Tool Output Controls
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Scan Tool Output Controls
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| Clear History Data | Special Functions | The object alarm module clears the park assist disable history when commanded from the scan tool. |
| Rear Red LED | Special Functions LED Test |
The object alarm module illuminates the rear red LED when commanded ON from the scan tool. |
| Rear Yellow LED 1 | Special Functions LED Test |
The object alarm module illuminates the rear yellow LED when commanded ON from the scan tool. |
| Rear Yellow LED 2 | Special Functions LED Test |
The object alarm module illuminates the rear yellow LED when commanded ON from the scan tool. |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.