2005 Cadillac STS 3.6 7FACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 4.70 OZS. 0.13 L PAG 46 S
Air Cond Refrigerant 1.40 LBS. 0.63 KG R-134a S
Automatic Transmission Fluid Drain and Refill 7.40 QTS. 7 L Automatic Transmission Fluid DEXRON VI Look for "Approved for H-Specification" on the label. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling. Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. S
Automatic Transmission Fluid Overhaul 9.40 QTS. 8.89 L Automatic Transmission Fluid DEXRON VI Look for "Approved for H-Specification" on the label. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling. Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. S
Brake Fluid N/A N/A DOT 3 Brake Fluid S
Differential Gear Oil Rear,Drain and Refill,w/Cover Removal 1.27 QTS. 1.2 L SAE 75W-90 Synthetic Gear Oil GM Part No. 12378261 or equivalent meeting GM Specifications: (9986115). Add 3.38 oz. of Limited Slip Additive. S
Differential Gear Oil Rear,Drain and Refill,w/use of Drain Plug 1.06 QTS. 1 L SAE 75W-90 Synthetic Gear Oil GM Part No. 12378261 or equivalent meeting GM Specifications: (9986115). Add 2.37 oz. of Limited Slip Additive. S
Engine Coolant 13.00 QTS. 12.3 L 50/50 mixture of DEX-COOL and clean drinkable water S
Engine Oil 3.6L Eng 6.00 QTS. 5.67 L API - SAE 5W-30 Use synthetic oil that meets GM Standard GM4718M. DO NOT use other viscosity oils such as SAE 20W-50. S
Fuel Tank 17.50 GALS. 66.24 L S
Power Steering Fluid N/A N/A GM Power Steering Fluid GM Part No. 89021184. S
Windshield Washer Fluid N/A N/A Optikleen Windshield Washer Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.