2004 Cadillac Escalade EXTFACTORY OEM SERVICE PROCEDURE

Maintenance Items

Maintenance Items

Usage Type
Engine Air Cleaner/Filter
  • 4.8L (VIN V)
 A1519C
25010633**
  • 5.3L (VIN T)
 A1519C*
25313348**
  • 5.3L (VIN Z)
 A1519C*
25313348**
  • 6.0L (VIN U)
 A1518C*
25313349**
  • 8.1L (VIN G)
 A1518C*
25313349**
Engine Oil Filter
  • 4.8L (VIN V)
 PF44
25010633**
  • 5.3L (VIN T)
 PF44
25010633**
  • 5.3L (VIN Z)
 PF44
25010633**
  • 6.0L (VIN U)
 PF44
25010633**
  • 6.6L (VIN 1)
 P/N 97214983
  • 8.1L (VIN G)
 PF454
89028862**
Spark Plugs
  • 4.8L (VIN V)
 12571164**
41-985*
  • 5.3L (VIN T)
 12571164**
41-985*
  • 5.3L (VIN Z)
 12571164**
41-985*
  • 6.0L (VIN U)
 12571164**
41-985*
  • 8.1L (VIN G)
 12578277**
41-983*
Fuel Filter
  • 4.8L (VIN V)
 GF626
  • 5.3L (VIN T)
 GF626
  • 5.3L (VIN Z)
 GF626
  • 6.0L (VIN U)
 GF626
  • 8.1L (VIN G)
 GF626
Wiper Blades (Front)
  • 4.8L (VIN V)
 15153642**
  • 5.3L (VIN T)
 15153642**
  • 5.3L (VIN Z)
 15153642**
  • 6.0L (VIN U)
 15153642**
  • 8.1L (VIN G)
 15153642**
Wiper Blade Type (Front)
  • 4.8L (VIN V)
 ITTA
  • 5.3L (VIN T)
 ITTA
  • 5.3L (VIN Z)
 ITTA
  • 6.0L (VIN U)
 ITTA
  • 8.1L (VIN G)
 ITTA
Wiper Blade Length (Front)
  • 4.8L (VIN V)
 22 inches (56.0 cm)
  • 5.3L (VIN T)
 22 inches (56.0 cm)
  • 5.3L (VIN Z)
 22 inches (56.0 cm)
  • 6.0L (VIN U)
 22 inches (56.0 cm)
  • 8.1L (VIN G)
 22 inches (56.0 cm)
Wiper Blades (Rear)
  • 4.8L (VIN V)
 22121329**
  • 5.3L (VIN T)
 22121329**
  • 5.3L (VIN Z)
 22121329**
  • 6.0L (VIN U)
 22121329**
  • 8.1L (VIN G)
 22121329**
Wiper Blade Type (Rear)
  • 4.8L (VIN V)
 ITTA
  • 5.3L (VIN T)
 ITTA
  • 5.3L (VIN Z)
 ITTA
  • 6.0L (VIN U)
 ITTA
  • 8.1L (VIN G)
 ITTA
Wiper Blade Length (Rear)
  • 4.8L (VIN V)
 14 inches (35.0 cm)
  • 5.3L (VIN T)
 14 inches (35.0 cm)
  • 5.3L (VIN Z)
 14 inches (35.0 cm)
  • 6.0L (VIN U)
 14 inches (35.0 cm)
  • 8.1L (VIN G)
 14 inches (35.0 cm)
*ACDelco part number
**GM part number
A1518C high-capacity air cleaner filter may be substituted.
Spark Plug Gag is 0.040 inches (1.01 mm).
Chapter Navigation
Return to Chapter: Specifications
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.