2004 Cadillac Escalade EXTFACTORY OEM SERVICE PROCEDURE

Fastener Tightening Specifications

Fastener Tightening Specifications

Application Specifications
Metric English
Accelerator Pedal Nut 20 N.m 15 lb ft
Air Cleaner Outlet Duct Clamp 7 N.m 62 lb in
Camshaft Position (CMP) Sensor Bolt 25 N.m 18 lb ft
Crankshaft Position (CKP) Sensor Bolt 25 N.m 18 lb ft
Crossover Fuel Pipe Retainer Clip Attaching Screw 3.8 N.m 34 lb in
Engine Coolant Temperature (ECT) Sensor 20 N.m 15 lb ft
Engine Wiring Harness Bracket Nut 5 N.m 44 lb in
Evaporative Emission (EVAP) Canister Bolt 25 N.m 18 lb ft
Evaporative Emission (EVAP) Canister Bracket Bolt 25 N.m 18 lb ft
Evaporative Emission (EVAP) Canister Bracket Nut 25 N.m 18 lb ft
Evaporative Emission (EVAP) Canister Purge Solenoid Bolt 10.5 N.m 93 lb in
Fuel Composition Sensor to Bracket Bolt 10 N.m 89 lb in
Fuel Composition Sensor Bracket Nut 17 N.m 13 lb ft
Fuel Fill Pipe Bracket Bolt 12 N.m 106 lb in
Fuel Fill Pipe Ground Strap Bolt 9 N.m 80 lb in
Fuel Filter Bracket Bolt 12 N.m 106 lb in
Fuel Pipe Bracket to Bellhousing Stud Nut 10 N.m 89 lb in
Fuel Pipe/Hose Bracket Bolt 12 N.m 106 lb in
Fuel Rail Bolt 10 N.m 89 lb in
Fuel Rail Crossover Pipe Retainer Clip Attaching Screw 3.8 N.m 34 lb in
Fuel Rail Pipe Attaching Screw 5 N.m 44 lb in
Fuel Tank Filler Housing to Body Screw 2.3 N.m 20 lb in
Fuel Tank Filler Housing to Fuel Tank Fill Pipe Screw 2.3 N.m 20 lb in
Fuel Tank Fill Hose Clamp 2.5 N.m 22 lb in
Fuel Tank Shield Bolt 15 N.m 11 lb ft
Fuel Tank Strap Bolt 40 N.m 30 lb ft
Fuel Tank Vent Hose Clamp 2.5 N.m 22 lb in
Heated Oxygen Sensor (HO2S) 42 N.m 31 lb ft
Ignition Coil Bolt 8 N.m 71 lb in
Knock Sensor (KS) 20 N.m 15 lb ft
Mass Air Flow/Intake Air Temperature (MAF/IAT) Sensor Clamp 7 N.m 62 lb in
Powertrain Control Module (PCM) Connector Bolt 8 N.m 71 lb in
Sending Unit Shield Nut 10 N.m 89 lb in
Spare Tire Hoist Crossmember Bolt 50 N.m 37 lb ft
Spark Plug
  • New Cylinder Head
 20 N.m 15 lb ft
  • Used Cylinder Head
 15 N.m 11 lb ft
Throttle Actuator Control Module Nut 9 N.m 80 lb in
Throttle Body Nut 10 N.m 89 lb in
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.