WARNING: This page is about a different car, the 2004 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

This feature recalls any previously programmed seat and mirror positions when the key is inserted into the ignition.

Programmable Modes

Mode 1: ON
Mode 2: OFF, mode 2 is set as the default mode from the factory.

To determine the mode to which the vehicle is programmed or to program the vehicle to a different mode, use one of the following procedures:

Base Audio System

Enter the Personalization menu following the instruction listed previously.
Scroll to Key In Recall Memory to highlight it.
Press the scroll/select knob to switch back and forth between on and off.

Navigation System

Enter the Personalization menu following the instructions listed previously.
Scroll to Key In Memory Recall to highlight it.
Press the scroll/select knob to view the modes.
Scroll to Key In Memory Recall and press the knob once to select it.

When the mode is turned on, an X will appear in the box to the left. If Remote Recall Memory/Recall Driving Positions was turned on previously, selecting Key In Memory Recall will override that choice. The mode you selected is now set. You can either exit the programming mode or program the next feature available.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Key In Recall Memory

Use the Manual With the Right Hardware

When to See a Mechanic