Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2003 Cadillac Escalade EXTFACTORY OEM SERVICE PROCEDURE
Base Audio System: Notes
WARNING: This page is about a different car, the 2003 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
- Enter the Personalization menu.
- Scroll to HORN SOUNDS AT LOCK to highlight it.
- Press the scroll/select knob to switch back and forth between on and off.
Navigation System
- 3.1. Enter the Personalization menu.
- 3.2. Scroll to Remote Keyless Options to highlight it.
- 3.3. Press the scroll/select knob to view the modes.
- 3.4. Scroll to Horn Sounds at Lock and press the knob once to select it. When the mode is turned on, an X will appear in the box to the left. If Lights Flash at Lock was previously turned on, selecting Horns Sound at Lock will override the previous choice.
The mode you selected is now set. You can either exit the programming mode or program the next feature available.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.