2003 Cadillac CTS AutomaticFACTORY OEM SERVICE PROCEDURE

Installation Procedure

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  1. Install the memory seat module and install the memory seat module screws (1).

    Tighten 

    Tighten the screws 2 N.m (18 lb in).

    Fig 1: Installing Memory Seat Module And Memory Seat Module Screws
    G02096151Courtesy of GENERAL MOTORS CORP.
  2. Connect the electrical connections to the module.
  3. Install the front seat cushion. SEAT CUSHION REPLACEMENT - FRONT 
    Fig 2: Connecting Electrical Connections To Module
    G02096152Courtesy of GENERAL MOTORS CORP.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.