Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2002 Cadillac Seville SLSFACTORY OEM SERVICE PROCEDURE
Anti-Lock Brake System: Specifications
Identifying Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| BPMV Brake Pipes | 15 N.m | 11 lb ft |
| BPMV to Frame Mounting Bolts | 9 N.m | 80 lb in |
| BPMV to Bracket Mounting Nuts | 10 N.m | 89 lb in |
| Brake Pressure Modulator Valve (BPMV) Bracket Mounting Bolts | 12 N.m | 106 lb in |
| Electronic Brake Control Module (EBCM) to BPMV Mounting Screws | 3.2 N.m | 28 lb in |
| Lateral Accelerometer Mounting Screws | 2.4 N.m | 21 lb in |
| Traction Control Mounting Screw | 2 N.m | 18 lb in |
| Yaw Rate Sensor Mounting Nuts | 6 N.m | 53 lb in |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.